CDLL980B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Single Zener diodes are widely used in circuit applications for voltage regulation, current regulation and other specialized purposes. Typical diode designations usually start with the letter “Z” for its Zener characteristic, followed by a two- or three-digit encoding that indicates the reverse breakdown voltage. For example, “CDLL980B” represents an 800 mV single Zener Diode.

The CDLL980B is a small signal Shottky diode with a low voltage drop and a shallow 9V reverse breakdown voltage. It is widely used in a variety of low-power electrical and electronic devices, including: mobile phones, tablets, laptops, personal digital assistants, portable music players and other consumer electronics devices.

The working principle of a Zener diode is based on avalanche breakdown. It has two electrodes, an anode and a cathode. When the voltage between the two electrodes reaches a certain value, called the breakdown voltage, the current increases dramatically due to the avalanche effect. For the CDLL980B, the breakdown voltage is 9V.

Once the breakdown voltage is reached, the current increases exponentially until the maximum reverse current of the diode is reached. This current is set by the diode design, typically 0.5 mA or higher, depending on the diode. As the current reaches the maximum, the voltage across the diode drops slightly and the current stabilizes.

The Zener diode has a number of unique applications. One of the main applications is voltage regulation. The Zener diode can be used to create a voltage regulator, where the output voltage is kept constant regardless of input voltage and load resistance variations. This is accomplished by using the Zener diode in conjunction with a resistor to limit the current through the diode to the breakdown current limit.

The Zener diode can also be used to create a shunt regulator, where the Zener diode is placed in parallel with a resistor. This is used to limit the maximum current in the circuit when the voltage reaches the breakdown voltage. This is useful for protecting sensitive components from over-current.

Single Zener diodes are also widely used in clipper circuits, which can be used to limit or remove a portion of a signal waveform. The Zener diode is placed in series with a resistor and the input signal, so that any voltage passing the breakdown voltage will be clipped, allowing only the lower portion of the waveform to pass through.

In addition, single Zener diodes are also used in radio frequency (RF) protection circuits. These circuits prevent damage to sensitive RF amplifiers and other components caused by high voltage spikes. The Zener diode is placed in parallel with the RF amplifier and absorbs any transient spikes in the signal, thus protecting the amplifier.

Single Zener diodes have become increasingly popular due to their cost-effectiveness and versatility. The CDLL980B is a great example of a single Zener diode which can be used in a variety of applications. It has a low forward voltage drop, shallow breakdown voltage and low noise, making it ideal for a number of electronic applications.

The specific data is subject to PDF, and the above content is for reference