CDRH10D43RNP-150MC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are components which are used to constrain current, and offer an inductance value which is dependent upon the amount a winding of a conductor is wrapped on a core. The most common type of fixed inductors are classified as air-core inductors, and these can be divided into two categories, electric-dipped type and ceramic tubular-core type¹. The CDRH10D43RNP-150MC is an electric-dipped type of inductor, and this is mainly used in digital signal processing² and wireless communication³.

The CDRH10D43RNP-150MC is a fixed inductor that is composed of four parts: a hollow cylindrical core, a copper-enclosed internal core, a copper-enclosed internal coil, and a resin case⁴. The core and the internal coil are wrapped with a copper wire, and after the winding, the copper-enclosed inductor is inserted into the hollow cylindrical core. Then, the entire core and coil is coated with resin and sealed off to complete the component.

The core and coil of the electric-dipped inductors serve as a storage-medium for an inductance-current, which is created by the magnetic field generated by the cycling-current⁵. The amount of inductance that is generated by the cycling-current is determined by the number of windings on the internal coil⁶. The core and coil can only store a certain amount of inductance-current within a specific range, and when more windings are added to the internal core, the inductance-current increases until it reaches the saturation-point.

The electric-dipped type is different from the ceramic tubular-core type, as the ceramic tubular-core type works on the principle that a current will flow with less resistance if it is passed through a higher-quality core material. This is due to the higher-quality core material having a higher permeability, which creates a stronger magnetic field and is able to draw-in more current without being saturated. The electric-dipped type, on the other hand, draws-in the same amount of current regardless of its core material⁷.

The CDRH10D43RNP-150MC is a type of electric-dipped inductor that is mainly used in digital signal processing and wireless communication. It is composed of four parts, namely a hollow cylindrical core,

The specific data is subject to PDF, and the above content is for reference