CDRH3D16NP-150NC Inductors, Coils, Chokes

Fixed inductors is a type of electrical component that is used for electronic circuits. Its main purpose is to store and release energy in the form of an electric field. In order to do this, fixed inductors have a core material such as iron or ferrite, which is wound to form a coil with multiple windings. The core material is then surrounded by a magnetic shield. The core and magnetic shield are connected to the circuit board and the inductor’s current flow is dependent on the core material and the magnetic field generated by the winding.

CDRH3D16NP-150NC is a fixed inductor that is used in various applications including radios, amplifiers, power supplies, etc. It is a high current product and has a frequency range between 1kHz to 50kHz. This fixed inductor has a maximum DCR of 0.15 ohms and its inductance range is between 10 to 150nH. The maximum current for this inductor is 16 Amp, and its rated temperature is between -40 to 105°C.

The working principle of the CDRH3D16NP-150NC fixed inductor is based on the electromagnetic induction law. This law states that when a conductor (a coil in this case) is placed in a magnetic field, a voltage is generated due to a changing magnetic flux. The generated voltage depends on the number of windings, the frequency of the magnetic field, and the total resistance of the coil. When an electrical current is applied through the inductor, a current will flow. The current is then stored as a magnetic field inside the inductor’s core, and the total inductance of the inductor is dependent on the number of winding turns, its core material, and the physical size of the inductor.

In practical applications, the CDRH3D16NP-150NC fixed inductor is mainly used to filter out any type of high frequency noise in electrical circuits. This can be done by connecting the inductor in series to the load. When the incoming current finds the inductor to be in opposition, it will change the frequency and amplitude of the current, thus effectively filtering out any noise. In some other cases, the inductor is also used in parallel with the load so that the inductor will filter out any type of low frequency noise in the signal.

The CDRH3D16NP-150NC fixed inductor is a very important component used in various electrical circuits. Its main purpose is to store and release energy in the form of an electric field, and its use in noise filtering makes it an indispensable component. It’s rated temperature of -40 to 105°C makes it suitable for a wide range of applications, making it a preferred choice where higher temperature requirements are a necessity.