CDRH12D78/ANP-100MC

DC Resistance (DCR):	22 mOhm Max
Height - Seated (Max):	0.315" (8.00mm)
Size / Dimension:	0.472" L x 0.472" W (12.00mm x 12.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	CDRH12D78/A
Shielding:	Shielded
Current - Saturation:	--
Current Rating:	4.2A
Tolerance:	±20%
Inductance:	10µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CDRH12D78/ANP-100MC application field and working principle

Introduction to Fixed Inductors

Fixed inductors are composite components made up of inductive elements and capacitors, or combinations of the two. They are mainly used as signal filters and reactive components in signal circuits. The inductance of fixed inductors is determined by the physical size and material of the core, and by the number and position of the windings. The capacitance of fixed inductors depends on the type and value of the material used to make the core. The characteristics of fixed inductors also depend on the number and position of the windings.

CDRH12D78/ANP-100MC applications

The CDRH12D78/ANP-100MC is a type of fixed inductor. It is a high performance and compact SMD inductor composed of a ferrite core and wire wound coil. It is mainly used in signal line filters for RF and analog circuits. It is also used in clock systems, power supplies, low frequency impedance matching, and as a shield for active components.

CDRH12D78/ANP-100MC working principle

The CDRH12D78/ANP-100MC is an inductor, which means it can store and release energy in the form of a magnetic field. This is accomplished by utilizing the principles of electromagnetic induction. When an alternating current is applied across the inductor, a magnetic field is generated. This magnetic field will then induce a voltage in the inductor, thus allowing energy to be transferred back and forth between the inductor and the electrical circuit. The higher the frequency of the alternating current, the greater the amount of energy that can be transferred. The inductance of the CDRH12D78/ANP-100MC is determined by the number of wire turns, the type of core used in the inductor, and the physical size of the inductor. The higher the number of turns, the greater the inductance of the inductor, and thus, the greater the amount of energy that can be transferred.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description