CDST-21-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CDST-21-G is a popular diode rectifiers - single typically used for power applications such as dc-dc converters, motor drive and various PFC applications. A diode rectifier is a device made up of two semiconductor diodes connected in series, typically utilized to provide unidirectional current flow and voltage blocking in a circuit. In a single diode rectifier, one diode is sufficient to carry out its intended purpose.

The CDST-21-G features a robust construction, with average forward current of 1.5A and a reverse voltage of 21V. It is rated at 1500V working voltage, with a maximum of 75V forward voltage drop. It can handle loads up to 100W continuous, and has a thermal resistance of 55°C/W.

The diode\'s working principle is that when the anode is connected to a positive voltage, current is allowed to flow from anode to cathode. Conversely, when anode is connected to a negative voltage, current is blocked from flowing. This behavior is due to the nature of the semiconductor material.

The working principle of the CDST-21-G can be further broken down into two distinct modes. In the first mode, known as off-state, the diode is reverse biased, meaning that the anode is at ground potential while the cathode is at a negative voltage. This prevents current from flowing through the diode, allowing the diode to block the negative voltage from the load.

The second mode is known as on-state, which is the opposite of off-state. Here, the diode is forward biased, meaning that the anode is at a positive voltage while the cathode is at a lower voltage. This allows current to flow from the anode to the cathode, providing power to the load. This mode is characterized by a forward voltage drop of approximately 75V.

In applications such as motor drive and dc-dc converters, the CDST-21-G can be used to provide voltage regulation and protection to the load. By connecting the diode in series with the load, it will block any negative voltage from reaching the load, providing a constant positive voltage to the load. Additionally, it will limit the amount of current allowed to flow, preventing the overload of the load.

The CDST-21-G is an ideal choice for power applications as it is rated at 1500V and can handle loads up to 100W with a forward voltage drop of 75V. Its robust construction and low thermal resistance makes it suitable for repeated switching in hard-working environments. Its working principle enables it to provide voltage regulation, protection and rectification, making it suitable for various power applications.

The specific data is subject to PDF, and the above content is for reference