CDST-914-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A diode is a two-terminal electronic component with an asymmetric conductance that allows current to only flow in one direction. The CDST-914-G, a single-phase diode, is a high-performance rectifier designed to provide reliable reverse voltage protection and fast switching up to 1.5A. The device is intended for use in a variety of applications, such as in switching power supplies, motor controllers, and DC-DC converter circuits.

When referring to diodes, a rectifier is any device that converts alternating current (AC) to direct current (DC). The CDST-914-G is a single-phase bridge rectifier, specifically designed for high efficiency and fast switching. Its typical application includes but is not limited to power factor correction (PFC) for AC to DC power converters.

The CDST-914-G features an anode to cathode voltage of up to 1.5A and a reverse recovery time of 16.0nS. Its high speed switching capability is ideal for high frequency applications and for large current or small current reverse voltage protection of critical circuit elements. The device has a maximum average forward current of 1.5A, with a peak repetitive forward current of 2.3A.

As far as the device\'s working principle goes, when no current is flowing through the diode, it acts as an open switch. When a current is present in the anode to cathode direction, the diode conducts and acts as a closed switch. This allows current to flow only in the anode to cathode direction, preventing current from flowing in the reverse direction.

The bridge rectifier works similarly to an ordinary rectifier, but with the addition of four diodes instead of two. The four diodes are wired in a bridge to create a complete electrical circuit when current is applied. The diodes connected in the center of the bridge allow current to flow from either the anode or the cathode, depending on the direction of the current.

The CDST-914-G can be used in any number of applications, such as in lighting, AC-DC power supplies, motor controllers, and DC-DC converter circuits. In its simplest form, the device can be used to provide reverse voltage protection, while in more advanced applications it can be used to improve the performance of power-factor correction circuits, reduce switching losses and improve efficiency. With its fast switching capabilities and low forward voltage drop, the CDST-914-G is an ideal solution for many power-supply designs.

In sum, the CDST-914-G is a single-phase bridge rectifier specifically designed for high efficiency and fast switching. Its most common applications include but are not limited to power factor correction (PFC) for AC to DC power converters. Its capabilities include a maximum average current of 1.5A, a peak repetitive current of 2.3A and a reverse recovery time of 16.0nS. As long as current is applied in the correct direction, the device allows current to flow only in the anode to cathode direction, preventing it from flowing in the reverse direction. It is an ideal solution for many power-supply designs.

The specific data is subject to PDF, and the above content is for reference