CGS103T250X4L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, also known as electrolytic capacitors, are widely used in electronic equipment due to their high capacitance and low cost. The CGS103T250X4L is a type of aluminum electrolytic capacitor and is a popular choice for many applications. This article will discuss the application field and working principle of the CGS103T250X4L, as well as other related information.

Description of the CGS103T250X4L

The CGS103T250X4L is a long-life, solid-aluminum, electrolytic capacitor. The capacitance of the CGS103T250X4L is 1000uF, and it operates at a nominal voltage of 250V. It also has a maximum ripple current of 4A and an operating temperature of -20 to +85°C. The CGS103T250X4L is available in a variety of sizes, from 8mm to 15mm in diameter, and from 17mm to 25mm in length. The size of the capacitor depends on the application it is used for, as well as its desired capacitance value.

Application Field and Working Principle of CGS103T250X4L

The CGS103T250X4L is a popular choice for applications such as: audio equipment, radio receivers, power supplies, voltage regulators, automotive electronics, and other electronic circuits. It is ideal for these applications due to its long life and stability. The CGS103T250X4L is also a good choice for a number of different power supplies. It can be used as a starting capacitor, a charge/discharge capacitor, a filter capacitor, a smoothing capacitor, or a snubber capacitor. The CGS103T250X4L is also widely used in DC-DC converters and AC inverters.

The CGS103T250X4L works by storing electrical charge in an electrolyte between two metal plates. The aluminum plates are connected to the positive and negative terminals of the capacitor, and the electrolyte is made of an acidic solution. When an AC voltage is applied across the terminals of the capacitor, the AC is converted to a DC by the electrolyte. This causes the aluminum plates to form an electric double layer which increases the capacitor\'s capacitance. The higher the voltage, the greater the capacitance. The electrolyte also helps to reduce the amount of energy lost in the form of heat.

Other Information about CGS103T250X4L

The CGS103T250X4L has a few important safety considerations that users should be aware of. It is strongly recommended to use a 10 Ohm resistor in series with each capacitor to limit inrush current and protect the capacitor from being damaged by high voltage. In addition, it is important to ensure that the capacitor is not subjected to any shocks or vibrations, as this can cause it to malfunction. It is also important to ensure that the correct polarity is observed when connecting the capacitor to the circuit.

The CGS103T250X4L is a reliable and cost-effective choice for many electronic applications. It is capable of providing stable power and performance in a variety of applications. It is important to consider the application field and working principle of the CGS103T250X4L before purchasing it, so that users can get the most out of their capacitor installation.

The specific data is subject to PDF, and the above content is for reference