CLA30MT1200NPB

Series:	DT-Triac™
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	1.2kV
Current - On State (It (RMS)) (Max):	33A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	170A, 185A
Current - Gate Trigger (Igt) (Max):	40mA
Current - Hold (Ih) (Max):	50mA
Configuration:	Single
Operating Temperature:	-40°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC, is the acronym of TRIode for Alternating Current, and is an electronic component which is made up of three terminals and a gate lead. It is used in many applications like motor control, light dimmers, lamp control, and switching applications. The CLA30MT1200NPB is a type of such triode and is a great choice for general purpose switching and dimming applications that operates from a 120VAC mains voltage supply.

What is CLA30MT1200NPB?

The CLA30MT1200NPB is a TRIAC gate trigger optocoupler. It features a 30 mA output current, an isolation voltage of 1kV, and an operating temperature range from -40 up to +125 degrees Celsius. It is a single channel device, which means that it can be used to control a single signal. It comes in a small package, measuring just 6 mm by 5.6mm. The device is designed to control TRIAC switch circuits.

How Does The CLA30MT1200NPB Work?

The CLA30MT1200NPB is designed to work with the TRIAC switch circuit. When the device is activated, it sends a signal to the TRIAC switch which then causes the circuit to turn on or off, depending on the type of application it is being used for. The device works by having an LED which emits a low optical input that is used to trigger the TRIAC switch. When the LED is energized, it produces an optical signal that is then sent to the TRIAC switch. When the TRIAC switch receives the signal, it will then open or close the circuit, depending on its design.

What is the Application Area of the CLA30MT1200NPB?

The CLA30MT1200NPB is typically used for applications where a low cost and reliable TRIAC switching solution is needed. This device is generally found in products like domestic light dimmers, motor control systems, and switching applications. Their small size also makes it perfect for more sophisticated IOT applications where space is limited. These devices can be used to control a wide range of loads, ranging from small ones like relays to complex AC motors that require more power and higher voltages. The CLA30MT1200NPB is easy to install, making it a great choice for anyone looking to build their own switching systems.

Conclusion

The CLA30MT1200NPB is a TRIAC gate trigger optocoupler, specifically designed for switching and dimming applications that require a 120VAC mains voltage supply. It is a small and cost-effective way to control a wide variety of loads from relays to complex AC motors. The device is reliable and easy to install, making it a great choice for any application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description