CLA4607-108

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Diode Type:	PIN - Single
Voltage - Peak Reverse (Max):	120V
Current - Max:	150mA
Capacitance @ Vr, F:	0.27pF @ 0V, 1MHz
Resistance @ If, F:	2.5 Ohm @ 10mA, 100MHz
Power Dissipation (Max):	250mW
Operating Temperature:	-55°C ~ 150°C (TA)
Package / Case:	SMD 1.83mm x 1.43mm
Supplier Device Package:	--
Base Part Number:	CLA4607-108

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<div><h3>Diodes - RF</h3> <p>CLA4607-108 is a special type of diode that is used for radio frequency (RF) applications. It is a capacitance-controlled direct-coupled symmetrical amplitude modulated (AMS) detector/ thresholder that can detect and recover amplitude modulated signals without the need for additional external components. This makes it ideal for use in a variety of applications.</p> <h4>Application Field</h4> <p>The CLA4607-108 diode is well-suited for RF detector and thresholder applications. It is mainly used in AM radio applications and can be used as an amplitude modulated (AM) detector in a receiver. It is also useful in various telemetry and communication systems, particularly in monitoring and measurement systems where the signal needs to be accurately determined. Additionally, it can be used as an AM detector in direct-conversion receivers, and as an AM detector and thresholder in a wide range of applications, including RF remote control and RFID systems.</p> <h4>Working Principle</h4> <p>The CLA4607-108 diode functions as a direct-coupled AM detector and thresholder, where no external components are needed. The diode has a series-connected internal capacitor that functions as a signal limiter. The signal is applied to the diode and it adjusts the signal frequency automatically and limits the signal amplitude. The result is a controlled and thresholded signal that can be accurately detected and recovered.</p> <p>The internal capacitor is used to set the signal conditioning in the CLA4607-108. This capacitor limits the signal amplitude, allowing the diode to accurately detect and recover the signal. The selection of the value of the capacitor is important and depends on the signal being detected, as the signal amplitude and frequency will affect the performance of the CLA4607-108.</p> <p>The CLA4607-108 diode also has a low-pass filter that aids in the detection and recovery of the signal. This helps filter out any high-frequency noise that may be present. The low-pass filter is connected at the output and helps to further limit and recovery the signal.</p></div>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description