CLA4611-000

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Type:	PIN - Single
Voltage - Peak Reverse (Max):	180V
Current - Max:	200mA
Capacitance @ Vr, F:	0.2pF @ 38V, 1MHz
Resistance @ If, F:	1.2 Ohm @ 10mA, 500MHz
Power Dissipation (Max):	870mW
Operating Temperature:	-65°C ~ 175°C (TJ)
Package / Case:	Die
Supplier Device Package:	Die

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CLA4611-000 is a type of diode designed specifically for Radio Frequency (RF) applications. It is commonly used in RF circuits and can be applied in various ways such as pre-amplifier, mixer, VCO, oscillator, switch and detector applications.The CLA4611-000 diode consists of two terminals, the anode and the cathode. The anode is connected to the positive terminal of the circuit and the cathode is connected to the negative terminal. In RF applications, the two terminals are used to either block or pass RF signals depending on the application. When used as a pre-amplifier, for instance, the CLA4611-000 is connected in a circuit between the antenna and the amplifier stage. This helps to increase the sensitivity of the antenna by prefiltering the signal and removing noise from the signal prior to sending it to the amplifying stage. This in turn results in a higher signal gain at the amplifier stage. The CLA4611-000 can also be used as a mixer or VCO. In this application, the RF signal is applied to one terminal of the CLA4611-000. This produces an electric current which is then sent to the other terminal. This current then modulates the RF signal and produces a new, modulated output. This output can be used to modulate the frequency of an oscillator, or to mix two signals together. Another application of the CLA4611-000 diode is as a switch. In this application, the diode is used to quickly switch an RF signal on and off. This can be used to switch an oscillator on and off, or to control the amplification of an amplifier circuit.Finally, the CLA4611-000 can also be used as a detector. This application involves passing an RF signal through the diode, which then produces an electric current that is proportional to the strength of the RF signal. This can be used to measure the strength of an RF signal or to detect the presence of a signal in a circuit.In conclusion, the CLA4611-000 is a versatile diode that can be used in a variety of RF applications such as pre-amplifier, mixer, VCO, oscillator, switch and detector. It is an indispensable tool for the modern radio frequency engineer, and has a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description