CMG02(TE12L,Q,M)

Series:	--
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	400V
Current - Average Rectified (Io):	2A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 2A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr:	10µA @ 400V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	SOD-128
Supplier Device Package:	M-FLAT (2.4x3.8)
Operating Temperature - Junction:	-40°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

CMG02 (TE12L,Q,M) is a type of Diode-Rectifier-Single (DRS). Diodes are one of the most basic components in electrical circuits and have many different applications, depending on the type of the diodes. DRS diodes are one of the most common and are used for a variety of purposes - from providing simple rectification of current, to providing voltage isolation, voltage clamping and other more complex applications. This article will discuss the applications and working principle of CMG02 (TE12L,Q,M).

Applications of CMG02 (TE12L,Q,M)

CMG02 (TE12L,Q,M) has many applications, especially in the fields of home automation, switching power supplies, and motor controllers. They are versatile and can be used in a variety of circuits and applications. CMG02 (TE12L,Q,M) diodes are used commonly in linear AC-DC power supplies and rectifiers, such as in consumer electronics, mobile phone chargers, and laptop adapters. The CMG02 (TE12L,Q,M) diodes provide an efficient and cost-effective way to convert alternating current into direct current. In applications such as these, CMG02 (TE12L,Q,M) diodes are used in pairs, with each diode in a pair taking one half of the AC-DC conversion cycle. This provides a much more efficient power conversion than a single diode.CMG02 (TE12L,Q,M) diodes are also used in switching power supplies, where the diodes are used to create a voltage “clamp” or “block”, which dissipates any overvoltage that may occur in the power supply. This prevents costly component damage and ensures the circuit is protected against any power surge. The CMG02 (TE12L,Q,M) diode also finds applications in motor controllers, such as speed controllers or stepper motor drivers. In stepper motors, the CMG02 (TE12L,Q,M) diodes are used to convert a sinusoidal waveform into two square-wave signals which are then sent to the stepper motor. This allows the stepper motor to be driven more accurately and with greater control. CMG02 (TE12L,Q,M) diodes are also used in home automation. In automated systems such as alarms and security systems, CMG02 (TE12L,Q,M) diodes are used to provide voltage isolation from other components in the system. This ensures that if one component in the system fails, the rest of the system is isolated and protected from the failure. The diodes also provide protection for the system from any voltage spikes that may occur.

Working Principle of CMG02 (TE12L,Q,M)

The CMG02 (TE12L,Q,M) is a surface mount diode which is designed to pass current in one direction only. This diode is a rectifier diode which means that it can be used to rectify an AC voltage. The cathode part of the diode will always be positive in relation to the anode and this is the way that current flow is controlled. In a linear AC-DC conversion application, two CMG02 (TE12L,Q,M) diodes are normally used, with each diode taking one half of the conversion cycle. During the positive half cycle of the AC voltage, the diode connected to the negative side of the AC voltage will be forward biased and thus allow current to flow through the diode in the forward direction only. During the negative half of the AC cycle, the other diode (positive to the AC cycle) will become forward biased, thus allowing current to flow in the forward direction only through this diode. This allows a voltage to be rectified into a DC voltage with the diodes acting as a “bridge” between the two AC cycles.In a voltage clamp or voltage block application, the CMG02 (TE12L,Q,M) diode acts to dissipate any overvoltage that may occur in the power supply. The diode is connected in reverse bias, so if the voltage in the power supply increases beyond the forward bias of the diode, the additional current will be diverted away from the power supply and towards the diode, thus protecting the power supply from potential damage.In motors such as stepper motors, the CMG02 (TE12L,Q,M) diodes are used to convert a sinusoidal waveform into two square-wave signals. This allows the stepper motor to be driven accurately and with greater control. The two CMG02 (TE12L,Q,M) diodes are connected in opposite directions so that one diode will become forward biased each time the AC input voltage reverses its polarity, thus providing a square-wave signal output instead of a sinusoidal waveform.In home automation applications, the CMG02 (TE12L,Q,M) diodes are used to provide voltage isolation between different components in the system, thus preventing any failure of one component from damaging the rest of the system. In some applications, such as alarms, these diodes can also be used to provide protection against any power surges.

Conclusion

CMG02 (TE12L,Q,M) is a Diode-Rectifier-Single (DRS), and is extremely versatile and has a wide range of applications. It is commonly used in linear AC-DC power supplies, switching power supplies, motor controllers, home automation and other applications which require efficient rectification of AC voltage and/or protection against power surges. The working principle of CMG02 (TE12L,Q,M) is based on the fact that the diode will only allow current to flow in one direction, and thus can be used to rectify an AC voltage or provide protection against power surges.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description