CMHZ4687 TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single can be used in various applications, such as power supplies, voltage regulation and fault protection. CMHZ4687 TR is a single Zener diode with a wide regulated voltage range of 4.5V to 35V and low power dissipation. This diode is equipped with an adjustable temperature calibration, a high-precision glass passivated junction, and a low-noise series breaker. The CMHZ4687 TR has a low forward voltage drop, good zener voltage regulation and is suitable for use in a variety of circuits such as AC-DC switching, power supplies and hydraulic systems.

When using the CMHZ4687 TR one must adjust the Zener voltage to the desired value. This is done by connecting a series resistor between the diode terminal and ground. By adjusting the resistor’s value the peak current can be set, which in turn sets the Zener voltage of the device. The resistor should be chosen so that it will support the desired current flow and not cause it to exceed the diode’s maximum allowable power dissipation.

The CMHZ4687 TR is being used in a variety of applications, including AC-DC switching, power supplies and hydraulic systems. In AC-DC switching the CMHZ4687 TR is used as a voltage clipper and a protective device. In power supplies, it is used as a voltage regulator to maintain specific regulated output voltages. In hydraulic systems, the diode regulates pressure and acts as a breaker for over-voltage protection.

In addition to the above uses, CMHZ4687 TR can also be used for fault protection in circuits, as well as for signal conditioning purposes. The diode is able to clamp and shunt a signal to provide noise protection and avoid false readings. The current sensing capability of the CMHZ4687 TR can also be used to limit the peak current of a signal, thus maintaining the operating range of the circuit.

The working principle of the CMHZ4687 TR is based on the fact that when a current flows through the device in either direction, the Zener voltage created will cause electrons to move in order to balance the voltage drop across the device. The higher the current flowing through the device, the greater the voltage drop — this is known as the Zener effect. The CMHZ4687 TR is designed to withstand high currents and maintain a fixed Zener voltage in order to protect the circuit from excessive voltages.

To conclude, the CMHZ4687 TR is a single Zener diode with a wide regulated voltage range and low power dissipation. It is suitable for use in AC-DC switching, power supplies, and hydraulic systems, as well as for fault protection and signal conditioning purposes. The diode is able to maintain a fixed Zener voltage by taking advantage of the Zener effect, thus providing accurate voltage regulation and protection for circuit components.

The specific data is subject to PDF, and the above content is for reference