CP0603A0460HLTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CP0603A0460HLTR is a RF directional coupler that typically finds its use in applications with high power RF signals. It is a tiny passive device measuring 0.6 x 0.3 inches, with a maximum frequency range of 4.6 GHz. A conventional directional coupler works by transferring some of the energy contained in a radio frequency (RF) signal from one port to another, usually in order to measure the power of an incident signal on one port or to couple the incident signal to some other device. The CP0603A0460HLTR is a 3dB directional coupler with a power handling capability of up to 10 watts and an insertion loss of less than 1.3dB.

In order to better understand the working principle of the CP0603A0460HLTR, we start by looking at the principle that most RF directional couplers are based on. Passive power dividers have, historically, been used as directional couplers, but these have significant power loss due to long cables and discontinuities. Modern RF directional couplers, like the CP0603A0460HLTR, use striplines and coplanar waveguide to couple RF signals. Striplines are used to connect the ground of a component to the ground of the system, preventing generation of unwanted higher order harmonics. The CP0603A0460HLTR uses a combination of these technologies to transfer energy from one port to another with low power loss.

The CP0603A0460HLTR RF directional coupler works by transferring electromagnetic energy from one port to another. It is comprised of a radiating element that couples the incident signal onto a line which is routed to the output port. This output line is also connected to a common ground for both ports and the reflected signal is routed to the input port. It is important to note that the power delivered to the output port is usually lower than the power received at the input, due to coupling and transmission line losses.

Most commonly, the CP0603A0460HLTR RF directional coupler is used in wireless communication systems where it is necessary to measure the power of the received signal or to couple it to other components. It is also common in antenna systems, where the received signal needs to be coupled to the receivers and/or amplifiers. It is also useful in power amplifiers, where it is necessary to provide feedback to the power amplifier circuitry in order to maintain the desired power output level.

Another type of application where the CP0603A0460HLTR RF directional coupler is used is as a hybrid combiner in cellular base stations. In such an application, the CP0603A0460HLTR would be used to combine two or more power amplifiers as to achieve the desired output power level. The CP0603A0460HLTR would transfer the power from each of the output ports to the common port. This power would then be amplified further in order to reach the desired output power level before being radiated from the antenna.

Additionally, the CP0603A0460HLTR RF directional coupler can be used as a means for measuring the incident power in other types of wireless systems, such as ultra wide band (UWB) and local area networks (LANs). When used for this purpose, the CP0603A0460HLTR would transfer the incident power to the output port, which could then be monitored using a power meter. This provides a means of measuring the incident power without having to directly measure the power of the transmitted signal.

The CP0603A0460HLTR RF directional coupler is normally operated in the low power range and should be protected from over-voltage transients. It is designed for use in a wide range of applications with RF signals, particularly in wireless communication systems or antenna systems where it is necessary to measure the power of the received signal or to couple it to other components.

The specific data is subject to PDF, and the above content is for reference