CPC1010N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are electrical switching devices used to control high voltage output circuits with a separate low voltage control signal. The CPC1010N is a type of solid state relay (SSR) and is suitable for use in applications such as AC switching, fail-safe control, and phase control. The CPC1010N is an optically isolated SSR which means that an LED light source is used to transfer the low voltage control signal into an electrical switch output.

In comparison to regular relays, SSRs have several distinct advantages. They are smaller in size, require less current, and do not contain mechanical components which can wear out over time. They are also much faster and, since no arcing occurs, they have a much longer service life than regular relays. Unlike a regular relay, the CPC1010N does not have any springs, contacts, or coils, making it a more reliable and accurate solution.

The CPC1010N has two electrical connections. The input is wired to the low voltage control circuit and the output is connected to the load circuit. The isolation barrier between the input and output is created by an opto-coupler which blocks all signals from passing from one side to the other. This way, the low control voltage circuit can be used while the high voltage side remains completely insulated.

The CPC1010N is designed to operate at a maximum load of 10A/400VAC and is suitable for both AC and DC loads.The switching speed of the CPC1010N is adjustable from 0.5ms to 5ms, allowing the user to control the amount of power delivered to the load. The CPC1010N has a built-in over-temperature protection feature which will disconnect the load in the event of an over-temperature condition.

The CPC1010N is suitable for a variety of applications, including industrial automation, lighting control, temperature control, motor control, and process control. It is ideal for use in applications where a high level of accuracy and reliability is required.

The working principle of the CPC1010N is based on the principle of optocoupling. When the low voltage control signal is applied to the input of the CPC1010N, an LED is activated and emits light which is picked up by a photosensitive diode on the other side of the opto-coupling or relay. This process creates an electrical connection to the load and a current flows through the circuit. Once the control signal is removed, the LED is de-activated and the current stops flowing, thus disconnecting the load.

The CPC1010N is a reliable and cost-effective solution for controlling high voltage loads with a low voltage control signal. It is suitable for a wide range of applications and provides a high level of accuracy and reliability. With its adjustable switching speed, over-temperature protection, and optically isolated design, the CPC1010N is a great choice for a variety of industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference