CPC1976Y

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are a type of electrical relay that works by using portable electronic components such as transistors, diodes, and integrated circuits to control the switch operation of a circuit. One such device is the CPC1976Y, which is used for controlling the on/off functions of high-voltage loads, such as DC and AC motors. It is suitable both for single-phase and two-phase operations. It has a built-in zero-crossing circuit, which eliminates the requirement for large filter capacitors and the associated switching noise.

The primary function of the CPC1976Y is to provide an accurate control of the electrical load by using an opto-coupler to drive a high-voltage MOSFET switch. The MOS transistor acts as a switch between the control signal input and the load, while the opto-coupler works as an isolator between the two. The opto-coupler has the additional benefit of providing a complete electrical isolation between the two parts of the circuit, which improves safety.

The CPC1976Y has a wide operating temperature range, from -40°C to +125°C, and a low switch on time of <1.5 ms. It is designed to work in both DC and AC switching applications, with solid state relays rated up to 400 Amps and AC to DC loads rated up to 600 VAC. The CPC1976Y employs an internal snubber circuit which increases the working life of the device. It also has an integral 250 VDC Flyback Voltage Protection (FVP) which protects the device from disruptive overvoltages.

The PC1976Y is easy to set up and use, with a few simple steps. Firstly, it is necessary to input a control signal of +3 VDC to +30 VDC into the MOSFET control terminal. When the control signal is applied, the MOSFET switch will then switch on, controlling the electrical load. The electrical current can then be adjusted by adjusting the control signal. Secondly, the current sense terminal of the device needs to be connected to the load. To adjust the current, the adjustable control range is adjusted up or down.

It is also possible to configure the CPC1976Y to provide a delay time when the MOSFET is switched on and off. This is done by setting the adjustable control range to a desired level prior to switching the load. The delay time can be reduced by increasing the control range and can be extended by decreasing the control range. This feature is especially useful for applications where overloading of the load is a problem or where it is necessary to control the speed of the motor.

The CPC1976Y also provides protection from surge voltages and over-current conditions. It has a built-in current protection circuit which will automatically shut down the power output of the device when an over-current condition is detected. It is also provided with an undervoltage protection circuit which will reduce the power output when the supply voltage drops to a predetermined level.

Overall, the CPC1976Y is a highly versatile and reliable device which is suitable for both DC and AC switching applications. It has a wide operating temperature range and provides easy control of the electrical load, as well as protection from destructive overvoltages and over-currents. The adjustable delay time feature also makes it a great choice for applications where motor speed needs to be controlled or where overloading is a potential problem.The specific data is subject to PDF, and the above content is for reference