CPCL10DFC

Series:	CPCL
Part Status:	Obsolete
Pressure Type:	Differential
Operating Pressure:	0.36 PSI (2.49 kPa)
Output Type:	Wheatstone Bridge
Output:	0 mV ~ 20 mV (12V)
Accuracy:	±2%
Voltage - Supply:	3 V ~ 16 V
Port Size:	Male - 0.16" (4.06mm) Tube, Dual
Port Style:	Barbed
Features:	Temperature Compensated
Termination Style:	PCB
Maximum Pressure:	5 PSI (34.47 kPa)
Operating Temperature:	-25°C ~ 85°C
Package / Case:	4-SIP Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pressure Sensors, Transducers and the CPCL10DFC Application Field and Working Principle

Pressure sensors are transducers that are typically used to measure pressure in liquids or air. They measure the pressure against a predetermined reference level, and output a signal that corresponds to the pressure being measured. Most pressure sensors are electronic, with a range of outputs including analog signals, digital signals, switch outputs, and even voltage signals.The CPCL10DFC is a type of pressure sensor and transducer that is specifically designed to measure pressure in liquids. It is an analog pressure transducer with an accuracy of 1 percent, and it is used in applications such as pressure monitoring, process control, and alarms. It has a range of 0-10 bar, and is equipped with a 5-pin DIN connector.The CPCL10DFC is constructed with a dual-element sensing element, which is connected to a differential amplifier. This amplifier has a reference voltage applied to one of the elements, and a pressure-linked signal is applied to the other element. The two signals are combined in the amplifier, and are then output as an electrical signal.The CPCL10DFC can be used in a variety of applications, such as measurement of liquid pressure in tanks, pumps, and compressor flow. It is also suited for use in alarms, and process control in areas such as chemical processes, medical applications, laboratory testing, and automotive and aerospace industries.In operation, the CPCL10DFC amplifier uses the same reference voltage for both sensing elements. When pressure is applied to one of the sensing elements, the output of the amplifier is affected. This output is then compared to the reference voltage, and the difference in the two signals is then used to determine the pressure being measured.The range of the CPCL10DFC pressure sensor is enhanced by the use of an integrated micro-controller. The micro-controller is used to control a hysteresis circuit, which ensures that the output is stable and accurate. This hysteresis circuit also enables the pressure sensor to output a linear response when measuring pressure in liquids.The CPCL10DFC is a reliable and accurate pressure transducer that is suitable for a range of applications. It is constructed with a dual-element sensing element, and is also equipped with an integrated micro-controller to control a hysteresis circuit. This ensures that the output is stable and accurate, even when measuring pressure in liquids. It has a range of 0-10 bar, and is easy to install and maintain.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description