Allicdata Part #: | CPTDINAV63HA3AX-ND |
Manufacturer Part#: |
CPTDINAV63HA3AX |
Price: | $ 0.00 |
Product Category: | Industrial Controls |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | 3PH 100/208VL 0-20MAOUT |
More Detail: | N/A |
DataSheet: | CPTDINAV63HA3AX Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | CPT-DIN |
Part Status: | Active |
Type: | Voltage Asymmetry, Phase Loss, Phase Sequence |
Trip Status: | Energized High/Low |
Trip Range: | 120 ~ 208V AC |
Delay Time: | 0 ~ 225 Sec |
Voltage - Supply: | 90 ~ 260VAC/DC |
Output Type: | Relay |
Circuit: | SPST-NO (1 Form A) |
Contact Rating @ Voltage: | 5A @ 250VAC/24VDC |
Mounting Type: | DIN Rail |
Operating Temperature: | 0°C ~ 50°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
CPTDINAV63HA3AX is a monitor-current/voltage-relay output with two-wire loop-powered features. The device is designed to be connected directly to the AC line voltage and is used to provide indication and protection for monitoring current, RPM, temperature, AC line voltage, ground fault and phase/cycle imbalance.
The CPTDINAV63HA3AX features a high accuracy voltage and current sensor with adjustable alarms and relays. It is designed to be mounted on flat surfaces, such as walls or ceilings. It is protected against dust, moisture and rain and can be used in a variety of low voltage applications, such as industrial applications, photovoltaic systems, and HVAC systems.
The CPTDINAV63HA3AX is also available with a built-in ground fault protection feature. It can detect and trip a fault at any point in the circuit. It also features a switchable high-performance LED display for visual monitoring of current and voltage. The LED display is designed to help diagnose and monitor system conditions during maintenance.
The CPTDINAV63HA3AX is designed with a wide set of input/output terminals, allowing the user to connect the device to a variety of test and measurement devices. The device has adjustable alarms and relays for power management, overload protection, and motor protection. The relays can be programmed to respond to input parameters within pre-set limits. The device can also be programmed to provide a warning signal before the relay trips and damages the system.
The CPTDINAV63HA3AX is capable of providing accurate control over AC current and voltage measurements. It is designed with a built-in conversion hardware for converting AC to DC current. The DC current measurement is accurate and the device can measure AC line voltage up to 1000 volts. It can be used with both single and three phase applications.
The CPTDINAV63HA3AX is designed with a current transformer and can measure current up to 50 amps. It provides reliable indication and protection for monitoring currents, RPM, temperature, AC line voltage, ground fault and phase/cycle imbalance.
The CPTDINAV63HA3AX is a versatile and cost-effective solution for monitoring and protection applications. It is easy to install and is designed to provide accurate and reliable results. It is a versatile device that is designed to provide reliable indication and protection for a wide range of applications. The device is designed to be connected directly to the AC line voltage and can be used in a variety of low voltage applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
CPTDINAV63HA3AX | Carlo Gavazz... | 0.0 $ | 1000 | 3PH 100/208VL 0-20MAOUT |
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V