CQ202-4B-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are electronic components that are used in many different types of electronics applications. They are composed of two main components: the main gate, and the control gate. Both of these components are interconnected so that when the control gate is triggered, the main gate will turn on or off, depending on the application. There are many different types of thyristors, including TRIACs, SCRs, and PUTs. Each type of thyristor has its own set of characteristics and uses.

A TRIAC is a type of thyristor, or a three-terminal semiconductor device that controls current. TRIACs are commonly used in AC circuits where switching or dimming of lighting is desirable. The CQ202-4B-2 is a TRIAC, and is designed to switch up to 200 V at a current of 4A. It is also designed to allow for a maximum holding current of 800 mA (milliAmp).

The CQ202-4B-2 operates by allowing for two types of firing signals. The first type is the forward firing signal, which is used to switch current on. As soon as a voltage higher than the firing voltage (6V for this model) is applied across the gate and main terminals, the TRIAC will begin to turn on and the current will start to flow. The second type of firing signal is the reverse firing signal. This type of signal is used to switch the current off. As soon as the voltage applied to the gate and main terminal is reduced below the firing voltage, the TRIAC will turn off and the current will stop flowing.

TRIACs are also usually designed to carry a certain amount of current. For this particular TRIAC, it is designed to carry 4A of current and has the ability to withstand 240V of continuous reverse voltage. This means that it is able to handle current up to 4A in most applications, as well as withstanding the amount of voltage that is applied without fail.

CQ202-4B-2 TRIACs are used in many areas, especially in AC circuits where dimming or switching of lighting is required. These TRIACs are used in many appliances such as washing machines, humidifiers, mixers and ovens. Additionally, they are also used in home automation systems and in industrial electronics.

TRIACs are easy to use and are reliable in their performance. They are able to provide switching with a minimum amount of power consumption and can be triggered with a very low signal. The CQ202-4B-2 is a highly reliable TRIAC and is suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference