CR12CS-16B#B00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The CR12CS-16B#B00 is a silicon controlled rectifier (SCR). It is an electronic component with many uses. It functions as an electrical switch, allowing current to flow through a circuit when its gate is triggered. It functions as a switch due to its ability to remain in its current state until the gate voltage is high enough to cause an avalanche breakdown of the junction, thus allowing current to flow through the circuit.

Application Fields

The CR12CS-16B#B00 SCR is used in a variety of different applications. It is commonly used as a switch in AC and DC circuits, power converters, switching regulators, crowbars, load controllers, and in motor control systems. It can be used to control lighting, heating, and air conditioning systems. SCRs are also used in the medical field for applications such as rectification and alternating current (AC) to direct current (DC) rectification.

Working Principle

The CR12CS-16B#B00 SCR is a three-terminal device comprised of a PN junction. It contains three terminals called the anode, cathode, and gate. When the anode and cathode terminals are connected to a positive and negative power source, respectively, the junction is said to be in the forward blocking state. The device will remain in this state until the voltage applied to the gate leads to an avalanche breakdown, allowing current to pass through the device. The device will remain in this state until the power is disconnected, or the gate voltage is removed.

The SCR typically operates in the zero-voltage state when operating in AC circuits. This is because it will latch off if the anode-cathode voltage is zero at the time of gate triggering. When a positive voltage of greater than the threshold voltage is applied to the gate of the SCR, a current is generated between the anode and the gate, or the cathode and the gate. This causes an avalanche breakdown, which increases the current flow through the device, allowing it to latch onto a continuous state as long as the voltage is maintained.

Conclusion

The CR12CS-16B#B00 SCR is an electronic component with many applications. It is used as a switch to control the flow of AC and DC currents by maintaining an open or closed state until gate triggering occurs. It is also used in a wide variety of applications, from lighting and heating systems to converter, regulator, and motor control systems. The device functions by latching onto a continuous state due to the avalanche breakdown between the anode and cathode, caused by the gate voltage.

The specific data is subject to PDF, and the above content is for reference