CR12FM-12B#BH0

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, or TRIACs, are semiconductor devices that contain three terminals for power control and protection applications. The CR12FM-12B#BH0 is a type of Thyristor, specifically a TRIAC. It is an optimized, cost-effective solution for many power control needs, offering greater efficiency and reliability than mechanical switches.

The CR12FM-12B#BH0 is a two-terminal electronic thyristor specifically designed for use as a gate turn-off (GTO) device. The device is intended for use in applications where high voltages (up to 1200V) must be switched or controlled. These devices are typically applied in high-power AC motor control, DC motor control, and uninterruptible power supplies (UPS).

Triacs have the general structure of a pair of back-to-back Thyristors sharing a common gate. This enables the device to simultaneously handle current in both directions, thereby providing for AC voltage control. The CR12FM-12B#BH0 uses an insulated gate to control the current flow through the device by by controlling the voltage across it. Once the gate voltage reaches certain level, the device becomes conductive and allows current to pass through.

The operation of the CR12FM-12B#BH0 is based on the principle of majority carrier injection. This principle implies that when a positive voltage is applied to its gate terminal, the majority carriers in the device\'s base region are injected into the emitter of the device, making it conductive. It should be noted that this device can also be triggered using a negative gate voltage.

The CR12FM-12B#BH0 is specifically designed to control the power supply of motors, switching the manual power and providing a reliable and efficient solution for switching high voltage and power applications. The device has a relatively low on-state voltage drop and an exceptionally low leakage current. Its switching characteristics are suitable for controlling resistive and inductive loads, and its surge current capability makes it suitable for use in transient protection applications.

The CR12FM-12B#BH0 TRIAC is a reliable and economical solution for a variety of AC power switching needs. Its construction is such that it can withstand high voltages, allowing it to switch large amounts of power and to reliably control the speed and torque of motors. The device is designed for use in a wide range of AC power applications, making it a versatile and cost-effective option for any motor control needs.

The specific data is subject to PDF, and the above content is for reference