CR4620-50

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CR4620-50 is a monitor, current/voltage transducer. It is an electronic signal transducer, which is used to measure current or voltage signal. It is designed to measure and monitor the signals accurately. It operates in a voltage range and is powered by a main power supply.

The application areas of CR4620-50 are typically in electronic systems such motor and control systems, communication equipment, measuring systems, etc. In these systems, the transducer will be used to measure the current and voltage signals, perform calculations, and convert the signal into a format that can be used to perform system-level operations. It can measure signals in the range of 0-4.7V and 20mA to 400mA, and it also has the capability of converting the signal into digital form.

CR4620-50 operates according to the principle of Wheatstone bridge. The transducer contains four resistors which act as a bridge structure. A wire connected to the top of the bridge provides the input signal, and three other wires connected to the other side of the bridge provide the output signals. The transducer then uses a voltage comparator to compare the input and output signals, and if a difference is detected, it will adjust the bridge circuit to equalize the input and output signals. Once the output signals match the input, the transducer will be in calibration mode, which means it has been calibrated and ready to use.

When the transducer is in operation, the output signals are monitored and processed to give a linear output signal. This output signal can be used to control the system or to give information about the current or voltage signal. The output signal can also be used to trigger an alarm that can alert the user if the signal goes over a certain threshold.

CR4620-50 has many features that make it well suited for many different applications. It is easy to install and use, and is capable of measuring both AC and DC signals. It is also designed for long-term reliability, with a reliable temperature and humidity rating. The transducer also has good accuracy and noise immunity. Finally, it is very cost effective and has a long lifespan.

In conclusion, CR4620-50 is a monitor, current/voltage transducer that can be used in many electronic systems. It measures signals accurately and can convert them into digital form. It works on the Wheatstone bridge principle and has many features making it suitable for a variety of applications. It is easy to install and use and is reliable and cost-effective.

The specific data is subject to PDF, and the above content is for reference