CTA16-1200BWPT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are semiconductor devices that are able to control the flow of current in both directions. The CTA16-1200BWPT specifically is a BRT type TRIAC, one of the most commonly used and versatile thyristor devices available. This application field and working principle will be discussed in greater detail in this paper.

Application Field

The CTA16-1200BWPT is mainly used in high power applications ranging from 1.200V up to 1.200A. Due to the unique bidirectional device design, it is suitable for power controlling, light controlling and motor speed controlling. Due to this ability to control the direction of the current, it greatly expands the application scope of Thyristors - TRIACs.

The CTA16-1200BWPT is suitable for applications such as 220V, 380V, 500V, 600V, 800V AC contactors, AC change-over switches, and other products. It is also suitable for various types of on/off load control, light dimming, motor speed control, and other AC devices. The CTA16-1200BWPT can also be used with light controlling products, lighting dimming products, fan speed regulating products and other electronic products.

Working Principle

Thyristors -TRIACs are three-terminal semiconductor devices that control the flow of electricity in both directions. The gate terminal of the device is used to control the ON/OFF condition of the device and the other two terminals are connected to the load. Depending on the voltage applied across the two terminals, the current will flow through the thyristor either in one direction or in the opposite direction.

In the case of the CTA16-1200BWPT, working on high-power (1.200V up to 1.200A) applications, a particular type of TRIAC is needed, namely the BRT (bilateral resonant trigger) type. This type of device is suitable for applications that need to control the current on either the positive or negative cycle of the AC waveform. This ensures a smooth and reliable current control, instead of abrupt on/off switching, which may cause disruption in sensitive devices.

The BRT type TRIAC offers a greater range of control than other Triacs. With an adequate gate current, the device can be switched on and off almost instantly, or its conduction can be modulated gradually. In addition, the device has substantially better performance in terms of dV/dt and dl/dt immunity.

When using the CTA16-1200BWPT, its on/off control is achieved through a pulse signal applied on the gate terminal at regular intervals. This signal can be generated from other electronic components such as Microcontrollers or specialized Application Specific Integrated Circuits.

Apart from being used in normal on/off applications, the CTA16-1200BWPT can also be used in specific conditions such as half-wave control, phase control, and alternating-phase trigger control. Depending on the desired application, the appropriate type of working mode can also be selected.

Conclusion

The CTA16-1200BWPT is a type of Triac specifically designed for high power applications. This device is capable of controlling current in both directions with an adequate gate current. It is suitable for loads ranging from 1.200V up to 1.200A and can be used in various applications including contactors, change-over switches, light controlling and motor speed controlling products.

Using the CTA16-1200BWPT, current control is achieved through a regular pulse signal applied on the gate terminal. Furthermore, depending on the application, the device can be used in normal on/off conditions, as well as in half-wave control, phase control, and alternating-phase trigger control.

The specific data is subject to PDF, and the above content is for reference