CW0011R000JE70HS

Series:	CW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	1 Ohms
Tolerance:	±5%
Power (Watts):	--
Composition:	Wirewound
Features:	Moisture Resistant, Pulse Withstanding
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.406" L (2.39mm x 10.31mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors are resistors whose leads pass through the body and are soldered to the board to secure them in place. The leads of these resistors are typically knurled or preformed for ease of insertion and removal from the circuit board. The body of the resistor usually features form-fitting slots for the leads, designed to hold it in place when in circuit. CW0011R000JE70HS through hole resistors are concentric winded resistors which differ from the traditional wirewound resistors in design. This paper focuses on the application field and working principle of CW0011R000JE70HS through-hole resistors.

Application Field

CW0011R000JE70HS through hole resistors have a very wide range of applications across many industries. The most common use of these resistors is in the automotive and electronics industries, where they are used in many electronic control systems, both to control the flow of electricity and to reduce the electrical noise caused by the operation of electronic devices. They are also used in many home and office appliances, such as air conditioners, refrigerators, TV sets, and computers. In addition, they are often used by telecom companies, as they are excellent at withstanding both heat and humidity without any distortion. Other applications include lighting applications, such as LED lighting systems, as well as general-purpose applications in the entertainment industry, where they are often used to control the flow of electricity through sound systems. They are also used in the military, for controlling the power output from communications and radar systems. Further, they are often used in industrial applications, providing protection against overloads, short circuits, and other electrical hazards.

Working Principle

CW0011R000JE70HS through hole resistors use a concentric winding technology to produce very high resistance. This winding technique uses two layers of metal resistance wire in different diameters, which reduces the amount of space required for the resistor. The different layers of wire are then joined together, forming a coil which is then attached to the front and back of the resistor. This arrangement allows for better thermal stability and greater power ratings than conventional wirewound resistors, while also providing good electrical stability. The metal used for the winding of the resistor is determined by the application it is used for. Common materials used include copper, aluminum, and nickel. It should also be mentioned that the size of the resistor will determine its maximum power rating, which is of utmost importance in applications where high power is required.

Conclusion

To conclude, CW0011R000JE70HS through hole resistors are widely used in many industries due to their excellent electrical and thermal stability. They are often used in automotive and electronics systems, as well as telecom, lighting, entertainment, and industrial applications. These resistors use a concentric winding technology which results in high resistance and high power ratings, while only requiring a small amount of space.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description