CW005R1800JE73HS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through-hole resistors are used for a variety of functions in electronics, both in applications that require direct connection to the circuit board and those that use an automated assembly process. The particular use of the device depends on the model type, size and current rating required for the application.

The CW005R1800JE73HS is a general purpose, through-hole resistor that is used in a variety of electronic applications, ranging from consumer electronics to medical instruments. The resistor is made from a mixture of carbon and ceramic materials depending on the application. It has a standard lead width of 0.3 mm and a component size of 5.6 mm x 10.5 mm. The power rating of the device is 1/4 watt and the resistance range is from 0.25 ohms to 18 MΩ.

The primary function of this resistors is to provide a resistance to the flow of electricity in an electronic circuit. This resistance can be used to help limit current to prevent overloading of sensitive components, reduce voltage, or create a known amount of energy. The resistance of the resistor will depend on the resistance value of the material it is made from, which can range from 0.25 ohms to 18 MΩ. When determining the appropriate resistor for an application, it is important to choose one with the correct resistance value and power rating for the circuit.

The CW005R1800JE73HS is designed to be mounted directly onto a printed circuit board (PCB). It has a spacing of 0.5mm to 3.0mm depending on the resistor size and the specific application. There are a variety of ways to mount this resistor including soldering it to the circuit board, using a mounting clip, or using a surface-mount technology.

In order to determine the correct resistor for an application, it is important to review the manufacturer\'s datasheet. The datasheet will provide the specifications of the resistor, including the resistance range, voltage rating, power rating, weight, temperature coefficient and other important parameters. Once the correct resistor is chosen, it can be installed onto the PCB and connected to the desired circuit.

In summary, the CW005R1800JE73HS is widely used as a through hole resistor in a variety of applications. It has a standard lead width of 0.3 mm and component size of 5.6 mm x 10.5 mm. The resistance range of the resistor is from 0.25 ohms to 18 MΩ and the power rating is 1/4 watt. It is important to review the manufacturer\'s datasheet for the correct resistor selection and installation instructions.

The specific data is subject to PDF, and the above content is for reference