CW00522R00JE73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components used in circuits that have a stationary terminal connected to a metal body inside a ceramic tube. Depending on the application, these devices can function as either transmission or termination line resistors. The CW00522R00JE73 is a Through Hole Resistor that is designed for termination line applications.

This component is known for its reliable performance and low thermal resistance. It is a surface mount device with a diameter of 0.57-inches (14.5mm) and a body height of 0.060-inches (1.55mm). It has a power rating of 0.050W and a lead diameter of 0.033-inches (0.85mm). The CW00522R00JE73 is a carbon-filled, wire-wound resistor with temperature coefficients of +100 ppm/°C. It has a maximum operating temperature range of +125C.

The CW00522R00JE73 is commonly used in termination line applications such as power-on protection, power-down protection, local decoupling, and dynamic voltage control. These applications require a resistor with a low thermal resistance and a low series inductance. The CW00522R00JE73 is designed to provide these features and ensure an efficient power delivery to the load.

The working principle of the CW00522R00JE73 is based on basic Ohm’s Law. It is a passive component and when connected to a circuit, it will oppose the flow of current. The amount of current flowing through the resistor is directly proportional to the voltage across it. The resistance of the resistor will remain constant in most cases unless it is exposed to extreme heat which will cause it to increase in resistance. The connection of the resistor will determine the type of current flowing through it which can either be direct or alternating.

The resistor is typically manufactured from a carbon impregnated resistive element which is wound around a ceramic core. This core provides insulation to protect the resistor from external sources of interference. The carbon-filled wire is the resistive element which determines the resistance of the resistor. The resistor is then brown-colored, anodized, and painted to provide protection against external contamination and heat.

In summary, the CW00522R00JE73 is a Through Hole Resistor that is designed for termination line applications. It is a carbon-filled, wire-wound resistor with temperature coefficients of +100 ppm/°C. It is commonly used in applications such as power-on protection, power-down protection, local decoupling, and dynamic voltage control. The working principle of this resistor is based on Ohm’s Law and is used to oppose the flow of current in a circuit.

The specific data is subject to PDF, and the above content is for reference