CW0012R400JE70HS

Series:	CW
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.4 Ohms
Tolerance:	±5%
Power (Watts):	--
Composition:	Wirewound
Features:	Moisture Resistant, Pulse Withstanding
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-65°C ~ 350°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.406" L (2.39mm x 10.31mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

I

Through Hole Resistors

Through hole resistors have been used in electronics for decades. One of these is the CW0012R400JE70HS through hole resistor. It is commonly used for circuits that require higher resistance values and can also be used for lower resistance values in certain conditions. This resistor type comes in two types: axial and radial.The axial type is constructed by inserting a ceramic core onto two metal leads and is typically the least expensive type of through hole resistor. The metal leads are usually tinned copper and allow current to flow from one end of the resistor to the other. It is available in sizes from 2 watt to 1,000 watts and in values from less than an ohm to more than 1 megaohm.Radial resistors are constructed by winding thin layers of tinned copper wire around a ceramic core with a much higher resistance than axial resistors. This type of through hole resistor is often used when the value of the resistor is very low and the wattage needs to be very high. It is available in sizes up to 500 watts and in values from less than 1ohm to 1megaohm.So, what is the application field and working principle of the CW0012R400JE70HS through hole resistor? This resistor type is used primarily in motor and power control circuits, audio and video recording equipment, and in telecommunications systems. It operates on the principle of Ohm’s Law. This law states that the current through a resistor is directly proportional to the voltage applied across it. To calculate the resistance of a resistor, the equation V=I*R must be used. V represents the voltage, I represents the current, and R represents the resistance.In terms of the CW0012R400JE70HS resistor, this type is specifically designed for high-frequency applications. It has a low inductance that allows it to operate effectively on high-frequency currents, and it has a high pulse-handling capability. It is also designed to minimize parasitic losses and reduce temperature rise. With its high power dissipation, it is ideal for applications that require power handling capacity that is greater than the wattage of the resistor.Through hole resistors, such as the CW0012R400JE70HS, provide consistent performance and long-term reliability. This makes them ideal for use in critical applications such as in motor control, telecommunications, or power control circuits. They are also preferred for use in audio and video recording equipment. Through hole resistors are reliable and economical and are a great choice for any designer looking for an inexpensive solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description