CW001R1000JE70HS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistor comprised of a metal-film, carbon composition, or thick film construction. The most commonly used resistance values range from 100 ohms to 100K ohms with a tolerance of ±1%. These are available in various sizes including ¼ watt, ½ watt, 1 watt, 1.5 watt, and 2 watt depending on the power ratings required.

The CW001R1000JE70HS Through Hole Resistors are amongst the most successful resistors available on the market. These resistors feature a solid metal-oxide body along with an annealed tinned copper wire wound element, encased in an epoxy resin coat and silicone rubber adhesive band over the entire body. The range of power dissipation of these resistors is 0.6 Watt at ambient temperature and 0.15 Watt at an elevated temperature.

These resistors are most commonly used in medium and small-sized applications and can easily be installed on the printed circuit boards. Some of their most common applications are for rectifying, filtering, and for controlling electric current. These also find application in lighting, TVs, consumer electronics, power supplies, safety circuits, and motors.

The working principle of the CW001R1000JE70HS Through Hole Resistor is based on the Ohm’s Law. Under this law, the resistance of the resistor in ohms is equal to the voltage applied across the resistor in volts divided by the current in amperes. The formula used to calculate the resistance of a resistor is R=V/I, where R is equal to resistance, V is equal to voltage, and I is equal to current.

The quality of the resistor will depend on the presence of one or more defects. The two most common defects are open and short defect. An open defect is said to occur when there is an increase in the resistance of the resistor. This type of defect can cause the device to not work properly. On the other hand, a short defect is said to occur when there is a decrease in the resistance of the resistor. This type of defect can cause an abnormal current draw and a possible overload to the circuit that is connected to the resistor.

The CW001R1000JE70HS Through Hole Resistors are known for their excellent electrical and thermal characteristics. They come with an epoxy coating which gives them a high level of mechanical stability and makes them highly resistant to any potential damage caused by heat or moisture. These resistors also have superior electrical insulation properties and superior voltage and current endurance characteristics. They are ideal for both static and dynamic applications due to their superior electrical and thermal characteristics.

In conclusion, the CW001R1000JE70HS Through Hole Resistors are an important device in the field of electrical engineering. They are used in many applications ranging from consumer electronics, lighting, TVs, power supplies, and safety circuits. These resistors come with a wide range of features such as superior electrical insulation properties, excellent electrical and thermal characteristics, and epoxy coating. These features make this resistor an ideal choice for various applications where reliability and performance is of prime importance.

The specific data is subject to PDF, and the above content is for reference