CW001R2700JE70HS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are components used in many electronics applications for limiting and controlling the flow of current. The specific component in question, CW001R2700JE70HS, is a carbon film through-hole resistor, and used for the same purpose as other resistors, but with a specific set of characteristics that makes it suitable for certain applications. This article will discuss the application field and working principle of the CW001R2700JE70HS resistor.

TheCW001R2700JE70HS is a carbon film resistors with a 2700 ohm resistance at 1/2 watt, or 4/10 watt withstanding power, and a tolerance of 5 percent. Its physical size is 0.25” (inches) long and 0.1” in diameter. The temperature coefficient of the resistor is type Y, meaning it has an Operating Temperature rating of -55 to +155°C (degrees Celsius). It is important to note that these values are only true when the resistor is used for its rated wattage.

The resistor is constructed of a carbon film housed in an epoxy-glass body. The resistor consists of a metallic film, which is deposited onto a cross-linkable polyamide film. The film is print etched with branding information, as well as the resistance value, and encased in a ceramic tube. The ceramic tube is then sealed and glued to the terminals, which are made out of a nickel-plated alloy.

The working principle of the resistor is simple. The resistor works by dissipating energy in the form of heat, whenever it is connected in a circuit. The resistors limit the flow of current in the circuit, based on its resistance, and as the current increases, the wattage of the resistor also increases. This causes the resistor to dissipate more energy, and as a result, more heat is produced. The temperature of the resistor is directly proportional to the current that is flowing through it. This allows the resistor to be used to regulate and protect circuits from over current or short circuit conditions.

The CW001R2700JE70HS resistor is well suited for use in a variety of electronic applications, such as power supplies, audio circuitry, and automotive systems. The resistor can be used in high wattage applications, due to its high wattage rating, and its ability to dissipate large amounts of energy. It can also be used in circuits where a low wattage rating is required, thanks to its low resistance rating and temperature coefficient of type Y.

Overall, the CW001R2700JE70HS carbon film resistor is a reliable, versatile, and cost-effective solution for many electronics applications, thanks to its wide operating temperature range, low wattage rating, and ability to dissipate large amounts of energy. Its physical size makes it easy to install into many tight spaces and its construction materials make it very durable. Therefore, the CW001R2700JE70HS resistor is a great choice for any application that requires a reliable, low wattage, and high power resistors.

The specific data is subject to PDF, and the above content is for reference