CW00550R00JE73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through Hole Resistors are a type of electrical component that is used in a wide variety of electronic devices and systems. These resistors are in the form of small cylindrical components with two terminals protruding from either side. The terminals are capable of being soldered onto the circuit board which makes the electrical connections between the resistors and the other components of the system. The resistors vary in resistance rating, tolerance and power rating, and are labeled with a code that gives information about the resistor properties.

The CW00550R00JE73 is a Through Hole Resistor that is commonly used in a range of electronic applications. It has a resistance value of 5.5 ohms, a tolerance of +/−5%, and is rated to handle up to 0.25 watts. It is made from a combination of copper and nickel, and each resistor is laser coded for identification. As standard, they are supplied in strips of 100, and each strip has a length of 1/2 inches (12.7mm).

The CW00550R00JE73 Through Hole Resistor can be found in a wide range of electronic applications, including audio amplifiers, video displays, medical devices, automotive control systems and telecommunications devices. The resistance value and the rating of the resistor enables it to be used in a wide range of different applications. As with all other Through Hole Resistors, the CW00550R00JE73 is designed to provide a precise resistance value, while also being able to handle the current and voltage requirements of the application in which it is used.

The working principle of the CW00550R00JE73 Through Hole Resistor is relatively simple. When a current is passed through the resistor, a voltage is induced across it. This voltage is dependent upon the value of the resistor, and provides a precise indication of the amount of current that is flowing through the resistor. The resistance value of the resistor can also be manipulated by changing the resistance coefficient, which can be done either by increasing or decreasing the length of the resistor, or by changing the material through which the current is travelling.

In general, Through Hole Resistors require more space than other types of resistors, and require manual wiring for installation. Also, due to their larger size, Through Hole Resistors can experience more EMI/RFI interference than other types of resistors. For these reasons, the CW00550R00JE73 Through Hole Resistor is most often used in applications where space is not a constraint and the degree of interference is relatively low.

The specific data is subject to PDF, and the above content is for reference