CWU4810

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSRs) are essential components in many automated systems. As an example, they are used to switch high-current AC loads, such as fans and motors, on and off in response to external commands, such as those transmitted by a control network. The response time of an SSR is very fast compared to that of a conventional electromechanical relay, which makes them particularly well-suited for applications that require precise and consistent control of high currents. In addition, SSRs are more reliable and require much less maintenance than electromechanical relays. One type of SSR that has been gaining increasing popularity in recent years is the CWU4810 series.

The CWU4810 is a 4-terminal, zero-crossing SSR with a high response time, making it suitable for applications in which high-speed switching of AC loads is required. It is designed to support high peak currents up to 10 amps, making it an ideal option for controlling motor and heater loads. The zero-cross feature allows the device to detect the instant when the current crossing the AC load is zero volts, and then to start switching the load on or off. This helps ensure a rapid and reliable response, with minimal impact on the AC load.

The CWU4810 is also designed to withstand high temperatures and is housed in an epoxy insulated case that makes it resistant to shock and vibration. This solid state relay is also highly flexible and can be powered by either an AC or a DC voltage source. It is also compatible with a wide range of input signals, including everything from a standard signal voltage up to a complex digital control signal. Because of these features, the CWU4810 can be used in a variety of applications, such as controlling valves in automated machinery, regulating air conditioning units and controlling heaters in medical equipment.

The main working principle of the CWU4810 is that it uses a triac to switch the AC load that is connected to it. When the input voltage reaches a certain level, the internal triac fires and the relay switches on. This causes the connected load to turn on or off, depending on the setting of the relay. In operation, the CWU4810 is very efficient, with typical power consumption of only 50mW when the relay is active. This helps to ensure reliable and long-term performance.

In summary, the CWU4810 series of solid state relays is a valuable addition to many automated systems. Its high response rate, epoxy housing and triac-based switching technology allow it to be used for a wide variety of applications. It is also highly efficient, making it a cost-effective solution for controlling AC loads. Additionally, the device is highly reliable and has a long life span.

The specific data is subject to PDF, and the above content is for reference