CY74FCT245ATSOCT

Series:	74FCT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Transceiver, Non-Inverting
Number of Elements:	1
Number of Bits per Element:	8
Input Type:	--
Output Type:	3-State
Current - Output High, Low:	32mA, 64mA
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	20-SOIC
Base Part Number:	74FCT245

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to the CY74FCT245ATSOCT

The CY74FCT245ATSOCT is a high-speed octal transceiver with 3-state outputs produced by Cypress Semiconductor produced by Cypress Semiconductor. It is a device that allows communication between two different buses. It is composed of two 8-bit bidirectional transceivers with 3-state outputs that switch between A and B buses. It saves time and space in system designs since it contains two 8-bit transceivers in a single package.

Application Field

The CY74FCT245ATSOCT is suitable for multiple applications, including:

• Use as a signal repeater or signal buffer
• Switching between two different buses
• Transmitting & receiving data
• Interface controllers with peripheral devices

This device is mainly used in embedded systems, medical equipment, automotive displays, and consumer products such as DVD players and digital cameras.

Working Principle

The CY74FCT245ATSOCT is an octal transceiver with 3-state outputs, which means that its output drivers are capable of sinking up to 64mA of current. This transceiver contains two 8-bit bidirectional transceivers. When the OE (output enable) pin is set to a low logic level, the transceiver’s output drivers are enabled. When the OE pin is set to a high logic level, the transceiver’s output drivers are disabled. The CY74FCT245ATSOCT is bidirectional, which means that it can receive data from both buses (A and B). It has two 8-bit transceivers, each of which is able to switch between the A and B buses. The transceiver on the A bus is directly linked to the transceiver on the B bus. When data is sent from the A bus to the B bus, the data is automatically passed through the transceiver on the A bus and then to the transceiver on the B bus. The CY74FCT245ATSOCT uses a 3-state logic output, which means that the output drivers are capable of sinking up to 64mA of current. The output drivers also provide full-on and full-off output levels at a maximum frequency of 25MHz.

Conclusion

The CY74FCT245ATSOCT is a high-speed octal transceiver with 3-state outputs produced by Cypress Semiconductor. It is a device that allows communication between two different buses. The CY74FCT245ATSOCT is suitable for multiple applications, such as serving as a signal repeater or signal buffer, switching between two different buses, transmitting and receiving data, and interface controllers with peripheral devices. The CY74FCT245ATSOCT is an octal transceiver with 3-state outputs, which means that its output drivers are capable of sinking up to 64mA of current. The transceiver is bidirectional, which means that it can receive data from both buses (A and B). The output drivers of the CY74FCT245ATSOCT can provide full-on and full-off output levels at a maximum frequency of 25MHz.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description