CY74FCT245TSOCG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CY74FCT245TSOCG4 is a logic IC. It belongs to the classification of Logic - Buffers, Drivers, Receivers, Transceivers. The device is a logic transceiver, which is intended for use in bi-directional data communication on bus-oriented digital systems. It is a bit-oriented octal bus buffer with 3.3V tolerant I/O.

The device is built using high-speed CMOS logic circuits, to provide the high-speed data transfer, and low power operation. The CY74FCT245TSOCG4 has an active bus-hold feature on the inputs and outputs, to facilitate driving the data bus when the devices is not actively controlling it. This reduces the need to always have a pull-up resistor on the bus.

The CY74FCT245TSOCG4 has several operating modes that can be selected by the user to select, enable, and enable all both data directions on the bus. The device is optimized for applications where very high speeds of up to 20MHz are required. It is available in an 8-Pin TSSOP package and is designed for a range of 3.3V power supply and -0.5V to 5.5V I/O voltages.

The CY74FCT245TSOCG4 has two separate parts, which are a 3-state outputs, and a level-translated bidirectional transceiver. The 3-state outputs drive the 3-state buffers buffers on the receiver side, which allow for data to be transferred in either direction. The level-translated bidirectional transceiver is used to allow the transmitter and receiver to be on different power supplies and I/O voltages. The 3-state outputs also buffer and isolate the transmitter side from the receiver side.

The CY74FCT245TSOCG4 has two distinct operating modes. These are "NORMAL" and "BCR" mode. In normal mode, the data flow from the transmitter to the receiver is active. In BCR mode, the data flow from the transmitter to the receiver is disabled, and the data flow from the receiver to the transmitter is enabled.

The CY74FCT245TSOCG4 has a wide range of applications. For example, it can be used in automotive applications where it is necessary to communicate data between a vehicle and motor control electronics. It can also be used in communications, power supplies, and medical devices.

In summary, the CY74FCT245TSOCG4 is a high-speed CMOS logic transceiver, which is designed for use in bi-directional data communication on bus-oriented digital systems. The device has an active bus-hold feature, 3-state outputs, and a level-translated bidirectional transceiver. It is available in an 8-Pin TSSOP package, and is designed for a range of 3.3V power supply and -0.5V to 5.5V I/O voltages. It has a wide range of applications, and is suitable for use in automotive, communications, power supplies, and medical devices.

The specific data is subject to PDF, and the above content is for reference