CY74FCT652CTSOCT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CY74FCT652CTSOCT is a fast CMOS logic device belonging to logic buffers, drivers, receivers, transceivers. It uses 4-bit non-inverting buffer/driver with 3-state outputs. This device contains two buffers which help to transfer information between systems or increase the fan-out. It has high noise immunity and a wide operating range of -5V to 5V.

The CY74FCT652CTSOCT has two input pins A0 to A3 and four output pins Y0 to Y3. Both of the inputs are connected to outputs through an array of transistors. It has an Enable pin which can be used to control the output. When the enable pin is active low, all the outputs are in high impedance state, thus information is blocked. Outputs are actively driven Low or High when the Enable pin is active High.

Each buffer/driver of CY74FCT652CTSOCT is able to drive up to 15 LSTTL loads and up to 40mA per output. It can be used in high speed and low power systems like high speed PC buses, system control, memory and system clock applications. This device is also useful for implementing transmission across buses. It is important to note that all outputs can be disabled with the enable pin, thus all signals can be blocked simultaneously.

The CY74FCT652CTSOCT contains a silicon gate CMOS process to create an active high-impedance state when the enable pin is active low. It offers a wide voltage range with low power consumption. The current consumption of this device is typically between 25 to 40µA per output. It has symmetrical outputs which ensures that high and low logic states are close to the VCC and GND lines.

The frequency response of this device is high, making it suitable for a number of applications. Outputs are actively driven Low or High when the Enable pin is active High. Outputs move away from each other and reduce crosstalk. The CY74FCT652CTSOCT device has high noise immunity with noise levels of 25 mV at 5V and 35 mV at 3.3V.

The working principle of CY74FCT652CTSOCT is simple and straightforward. Inputs A0 to A3 are connected to the buffer/driver circuit. When the Enable pin is active High, the outputs are actively driven High or Low and transfer information. When the enable pin is active Low, all the outputs are in high impedance state and the device stops transferring the information.

The CY74FCT652CTSOCT is a versatile and cost-effective CMOS logic device which is used in a wide range of applications including PC buses, system control, memory, and system clock applications. It offers a wide voltage range with low power consumption and high noise immunity. Outputs are actively driven when the Enable pin is active High and all outputs can be disabled with the enable pin.

The specific data is subject to PDF, and the above content is for reference