CY8C5666LTI-LP005

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CY8C5666LTI-LP005 Application Field and Working Principle

The CY8C5666LTI-LP005 is an ultra-low power, low-voltage 0.58 V to 4.5 V, 256 K byte Flash PSoC 5LP device that is designed for mobile devices, as well as industrial and consumer applications. It can be used in a wide range of applications, ranging from digital signal processing and low-power devices that require high performance. The device is particularly suitable for applications such as:

• Low-power, low-voltage sensor monitoring, detection, and control
• Voice-recognition systems
• Point of sale (POS) systems
• Intelligent security and surveillance systems
• Industrial automation and robotics
• Automotive and aviation infotainment systems

The CY8C5666LTI-LP005 is based on the PSoC architecture, which includes a 8-bit 8051 compatible CPU. The operating voltage of the CY8C5666LTI-LP005 is from 0.58V to 4.5V and the device can operate with a 1.8V core and peripheral voltages. In addition to the 8051 CPU, the device contains several data converters and input/output (I/O) components. It supports several external memory devices and has five independent channels that can be configured as analog or digital. The device also includes four digital blocks, two timing blocks, and one capacitive sensing block.

Working Principle of CY8C5666LTI-LP005

The core of the CY8C5666LTI-LP005 is an 8-bit microcontroller that features a Harvard architecture consisting of an 8-bit 8051 CoreInstructionset and 128 KB of total Flash memory. The device also features 5 timers, 12 Pulse Width Modulation (PWM) outputs, 32-bit system clocks, 8-bit I2C Bus Master/Slave module, and 2 separate serial routers. In addition to this, the device features an external memory controller,an Analog-to-Digital Converter (ADC) module, and a comprehensive selection of analog peripherals. All of the above features are connected to a high-speed interconnect bus, allowing the microcontroller to communicate quickly and efficiently with external peripherals.

The 8051 core of the CY8C5666LTI-LP005 handles all of its executionand it also includes hardware-based support for popular extensions to the 8051 such as the interrupt vector table, power-managementsupport, and enhanced math processing. The device also includes a self-adjusting power manager which allows the microcontroller to power down the unused components, thus saving power consumption. The analog-to-digital converter (ADC)module supports 4 single-ended or 2 differential input channels and it can operate at a resolution of 12-bits or 8-bits, depending on the application requirements. The ADC module can sample up to 32 ksamples/sec.

The external memory controllerof the CY8C5666LTI-LP005 is used for interfacing with external 4-Mbit nor Flash memory devices, allowing for more storage capacity. The memory controller supports 8-bit parallel Flash access and it has a programmable memory space that can address up to 2-Mbit of external Flash. The Flash memory can be split in to separate banks, allowing different code areas to be selected by the code executing on the core. In addition, the memory controller supports a range of commands including erase, write, read, and reset. The external memory controller also supports Burst mode accessfor faster memory transfers.

The 32-bit system clocks of the CY8C5666LTI-LP005 are designedto provide reliable, accurate timing for all components of the PSoC. The external clock input can be used to synchronize all of the periphery components and the internal clock sources can be configured for either a fixed frequency or variable frequency operation.By using the clock dividers, the clock frequency of the peripherals can be reduced to save power. The PSoC 5LP also includes two low-power sleep modes for handling power-down conditions, making it suitable for use in battery-powered applications.

The four digital blocks of the CY8C5666LTI-LP005 can beused to interface with a variety of different peripherals such as UARTs, USB controllers, I2C, SPI, and CAN bus. The device also includes two separate serial routers which can be used to enable data transfers between the microcontroller and peripherals mounted on the same board. The I2C, SPI, and UART interfaces are all fully compliant with the respective standards and allow for a higher data transfer rate compared to the standard serial interfaces. Additionally, the PSoC 5LP features an Internal Serial Peripheral Interface, which allows for efficient communication with other PSoC devices.

The capacitive sensing block of the CY8C5666LTI-LP005 can be used to detect the presence of a capacitive surface. It can be used in a variety of applications such as gesture detection, touch buttons, and proximity sensing. The block supports both self- and mutual-capacitance sensing, and it can detect both DC and AC excitation signals. The block can be configured for different touch sensitivity levels and it also supports an external voltage and temperature sensor for more accurate results.

Conclusion

The CY8C5666LTI-LP005 is a low-power, low-voltage microcontroller that is designed for mobile, industrial, and consumer applications. It features a 8-bit 8051 CoreInstruction set and a comprehensive selection of analog peripherals as well as multiple digital blocks, two timing blocks, and one capacitive sensing block. The external memory controller allows for interfacing with external 4-Mbit nor Flash memory and it also features five independent channels that can be configured as analog or digital. The device also features a self-adjusting power manager that can power down the unused components, thus providing power savings. Additionally, the device has two low-power sleep modes which make it suitable for use in battery-powered applications. With its wide array of features, the CY8C5666LTI-LP005 is an excellent choice for low-power, low-voltage, and high performance applications.

The specific data is subject to PDF, and the above content is for reference