CYW4319XKUBGT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF transceiver ICs are integrated circuits (ICs) designed to receive and transmit radio frequency (RF) signals. The CYW4319XKUBGT RF transceiver IC is an integrated RF transceiving system-on-chip (SoC) solution that combats constrained form factor and cost requirements of connected devices. This low-power, single-chip device integrates a complete 2.4 GHz physical layer (PHY), MAC, and baseband processor. It can be widely used for 802.11 b/g/n-compliant systems and is highly suitable for a wide range of Internet of Things (IoT) applications.

The CYW4319XKUBGT is an ideal solution for connectivity applications that make use of 2.4 GHz Wi-Fi, such as access points (APs), routers, gateways, as well as IoT end points, medical, military, and automotive applications. It supports MIMO (Multiple Input Multiple Output) up to 3 streams, resulting in high throughput performance, thus optimizing user experience. Other features include:

• 2.4 GHz WLAN physical layer transceiver, allowing data transmission rates up to 300 Mbps
• IEEE 802.11a/b/g/n-compliant MAC support, enabling superior networking
• Integrated baseband processor, including digital signal process (DSP) and baseband logic, for improved signal-processing performance
• On-chip power amplifier and low-noise amplifier (PA/LNA)
• Integrates an image signal processor (ISP) for camera applications
• Provides support for multiple power-saving modes

The CYW4319XKUBGT RF transceiver\'s working principle is based on the concept of a radio frequency (RF) transceiver, which transmits and receives data. It can do this in two modes: a transmit signal mode and a receive signal mode. In transmit signal mode, the CYW4319XKUBGT transmits RF data from an antenna to RF receivers (e.g., access points and receivers). In receive signal mode, the CYW4319XKUBGT receives data from wireless transmitters (e.g., access points and routers) and sends the data to an antenna for transmission. This process is done through the help of the baseband processor, DSP, and MAC.

For transmission, the CYW4319XKUBGT first processes the data in the baseband processor, DSP, and MAC before sending it to the digital-to-analog converter (DAC). The DAC will then convert the data into an analog signal, which is then amplified by the power amplifier and low-noise amplifier (PA/LNA). After that, the analog signal is modulated onto a RF carrier, and the modulated signal is then sent to the antenna. In receive signal mode, the CYW4319XKUBGT first receives a modulated RF signal from the antenna and sends it to the low-noise amplifier (LNA). The LNA amplifies the signal and sends it to the analog-to-digital converter (ADC). The ADC then converts the signal back to digital data, which is then processed again in the baseband processor, DSP, and MAC before being sent to the intended device.

The CYW4319XKUBGT RF transceiver can be widely used for 2.4 GHz 802.11b/g/n-compliant systems. It is an optimized solution for those who need maximized performance in a small form factor and with cost constraint in mind. It also features multiple power-saving modes for increased battery life and optimized user experience. With its powerful processing capability, high-performance radio frequency MODEM, and integrated baseband processor, CYW4319XKUBGT is highly suitable for a wide range of internet of things (IoT) applications.

The specific data is subject to PDF, and the above content is for reference