CYW43362SKUBGT

Power - Output:	18.5dBm
Operating Temperature:	-30°C ~ 85°C
Current - Transmitting:	260mA ~ 320mA
Current - Receiving:	52mA ~ 59mA
Voltage - Supply:	3.3V
GPIO:	5
Serial Interfaces:	JTAG, SPI, UART
Memory Size:	448kB ROM, 240kB RAM
Sensitivity:	-97dBm
Series:	--
Data Rate (Max):	72Mbps
Frequency:	2.4GHz
Modulation:	16QAM, 64QAM, BPSK, QPSK
Protocol:	802.11b/g/n
RF Family/Standard:	WiFi
Type:	TxRx + MCU
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CYW43362SKUBGT RF Transceiver ICs

CYW43362SKUBGT RF Transceiver ICs are a type of integrated circuit (IC) designed for use in radio-frequency (RF) communication systems. These chips allow digital information to be transmitted and received over high-frequency electromagnetic waves. The CYW43362SKUBGT RF Transceiver ICs are commonly found in wireless networking systems, GPS navigation devices, and cellular phones.The CYW43362SKUBGT is a single-chip 802.11ac/abg wireless transceiver that uses an ultra-low power radio architecture designed to operate at 2.4-2.5 GHz and 5.0 GHz frequencies. It features improved power efficiency, increased throughput and extended range. The chip is based on the 802.11n standard, which gives the CYW43362SKUBGT increased data rates and flexibility. It is capable of supporting up to 256-QAM modulation.The CYW43362SKUBGT includes a baseband processor with a CMOS transceiver as well as various other digital and RF circuits. This board is able to support multiple concurrent connections. The baseband processor integrated is capable of performing 802.11ac MAC tasks, data encryption, signal processing and forward error correction. The integrated transceiver can be tuned to various wireless protocols such as IEEE 802.11a/b/g/n/ac.The CYW43362SKUBGT is capable of supporting up to a theoretical 1.3Gbps data rate in the 5.0 GHz band, or up to a theoretical 65Mbps data rate in the 2.4 GHz band. The integrated chip also supports 256-QAM transmitting and receiving for higher data rates. The chip also includes an RF switch that can be used to provide dual-band capabilities.The CYW43362SKUBGT includes an integrated power amplifier and power management ICs to enable a high level of power efficiency. This power efficiency allows the device to use less energy while maintaining a high level of performance. The chip also features an integrated frequency synthesizer to eliminate the need for external components.The CYW43362SKUBGT is an ideal choice for applications where low power, high throughput, extended range, or dual-band capabilities are required. It has been widely adopted for Wi-Fi, wireless LANs, Bluetooth PANs, and ZigBee applications.When implementing the CYW43362SKUBGT in an application system, designers should consider various trade-offs such as system overhead, operating speed, operating range, cost, and power efficiency. Additionally, the transceiver should be optimized for the application taking into consideration RF and digital signal conditioning, antenna types, board layout, and power management. The designer must also consider firmware configuration, RF filtering, noise immunity, and safety and regulatory considerations.In summary, the CYW43362SKUBGT RF transceiver ICs are an ideal choice for applications that require low power, high throughput, extended range, or dual-band capabilities. Designers should carefully consider various factors during implementation to ensure optimal performance for their application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description