CZRUR39VB-HF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are widely used in modern electronics and are one of the most vital components of any electronic circuit. While the basic operation of a diode–allowing current to flow from anode to cathode–is well-known and understood, there are many specialized types of diodes that provide different capabilities or applications. The CZRUR39VB-HF diode falls into the category of diodes known as Zener diodes, which are used to regulate voltage in various applications.

Application Field

A Zener Diode, such as the CZRUR39VB-HF, is designed to operate in reverse bias, allowing current to flow from cathode to anode. It has a unique capability that sets it apart from other diodes; when voltage at the cathode reaches a certain set level, the diode ‘breaks’. This means that the diode suddenly allows much larger amounts of current to flow from the anode to the cathode. As such, Zener Diodes are used in many applications where a consistent voltage level must be maintained, such as in voltage regulators and many other power supplies.

The CZRUR39VB-HF Zener Diode is particularly well-suited to applications where an adjustable voltage between 3.0V to 9.0V is required. Its 9.0V nominal breakdown voltage makes it ideal for a wide range of applications; its relatively low reverse breakdown current of 25mA makes it well-suited for use as a voltage regulator in many DC-DC converters and other applications where more current is not needed.

Working Principle

The basic operation of a Zener diode is relatively simple: when the voltage on the cathode rises over a certain value, the diode rapidly breaks down and begins to allow current to flow from anode to cathode. The voltage seen on the cathode is known as the breakdown or Zener voltage, and is determined by the characteristics of the diode. As mentioned above, the CZRUR39VB-HF Zener Diode has a nominal breakdown voltage of 9.0V. This means that when voltage on the anode drops below 9.0V, current will begin to flow from the cathode to the anode.

To maintain a consistent voltage on the diode\'s cathode, a resistor must be connected to the diode in order to limit the current. This is necessary in order to keep the current through the diode constant; if the current increases, the voltage on the cathode will also rise and cause the diode to break down more rapidly. The resistance required will depend on the application as well as the maximum current that the diode is expected to handle.

When the CZRUR39VB-HF diode is used in an application, its breakdown voltage should always be specified in order to ensure proper operation. In addition, the maximum current flowing through the diode should be specified in order to protect the diode from accidental damage caused by overcurrent. The use of a Zener diode such as the CZRUR39VB-HF can significantly reduce the complexity of power supply design, but it is important to understand the diode\'s operating characteristics before using it in a new design.

The specific data is subject to PDF, and the above content is for reference