DC200A20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays (SSR) are devices that are mainly used for controlling switching loads in different application areas. The SSR makes use of non-mechanical switching elements like thyristors, triacs and transistors for controlling the switching of load currents with time delay and over-load protection. DC200A20 is an SSR device is designed for controlling in different applications to ensure a long-term reliable and accurate performance.

This DC200A20 SSR device is basically composed of several components to achieve different control functions. It is equipped with two normally open contacts, a load voltage sense circuit, an over-voltage crowbar circuit, a control circuit board with time delay and overload protection, a loadSwitch circuit, and several status LEDs. All the functional components are mounted on the control circuit board of the DC200A20.

The main purpose of this DC200A20 SSR device is to provide an electrical isolation between the input control voltage and the load with low electrical noise. This is accomplished by using the normally open contacts which isolates the high input voltage from the lower voltage of the load. The DC200A20 SSR device also offers over-voltage crowbar, time delay and over-load protection functions to keep the load in a safe condition. Additionally, the device provides an input control voltage sense to ensure that the correct voltage is available and is maintained even when the load is switched on or off.

When the input control voltage is applied to the DC200A20, the control circuit is activated to turn on the load switch. The load switch will then take over the switching of the load and the control circuit board will be responsible for time delay and over load protection functions. The time delay and over load protection are ensured with the help of a voltage sense circuit that monitors the input control voltage and the load voltage. The over-voltage crowbar acts as an extra layer of protection to limit the voltage that can be supplied to the load. By constantly monitoring the voltage supply input and switch the load when the voltage goes above an acceptable limit, the over-voltage crowbar helps in preventing the system from getting damaged due to an over-voltage.

The DC200A20 can be used in a wide variety of applications like motor controls, safety instrumentation systems, industrial process applications, and many other types of load switching applications. It can be used to control the switching of normally on and normally off relay loads, and even be used to switch heavy or inductive loads like air conditioners and compressors. In addition to these functions, the DC200A20 SSR device can also be used for setting time delays which will be particularly useful in sequences of load switching in process control systems. This feature is also beneficial in controlling the start and stop functions of different electric motors.

The DC200A20 SSR device is designed to provide high quality switching functions, an optimum degree of protection, and quite long service life. This device is cost-effective and reliable solution for controlling the switching of different loads in various applications, while offering maximum safety and protection.

The specific data is subject to PDF, and the above content is for reference