DEMOBOARD PROFET

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Evaluation and Demonstration Boards and Kits have been a popularform of electronic system evaluation since their introduction in the early 70s. With the advent of the digital age, they have become even more prevalent. Today, there are hundreds of evaluation and demonstration boards available from all major manufacturers, ranging from development boards to total systems. One such board is the DEMOBOARD PROFET. It is an evaluation and demonstration board that has been designed for use in the field of device testing and application of FET technology.

The DEMOBOARD PROFET is a multi-channel Field Effect Transistor (FET) evaluation and demonstration board based on five discrete channels. Each channel has two switchable input terminations and a common source. The board has 3- and 4-terminal characteristics, as well as both N and P channels. The board also provides a linear power supply, a reset signal, and a common bias for each of the five channels. This makes testing and evaluating power FET prototypes extremely straightforward.

DEMOBOARD PROFET is built on a simple and efficient hardware architecture. The board consists of three main components: a master controller, several discrete FETs, and a matching resistor bridge. The board is powered by an external supply and a reset signal, which allow the board to reset its internal logic. The master controller controls all of the FETs and the associated components on the board. The master controller also allows for different test conditions and allows for programming of power FET characteristics.

The DEMOBOARD PROFET works by first providing the power FETs with the required input voltages. The input terminations can be switched between several different levels, depending on the desired effect. When this is done, the board then proceeds to activate the FETs accordingly. This is done through the use of the resistor bridge. The resistor bridge connected to each FET compares the input voltage to the actual characteristics of the power FET. If the voltage is within a certain range, the FET is activated accordingly. This process is repeated on each FET until all of the FETs have been correctly activated.

The DEMOBOARD PROFET is an excellent evaluation and demonstration board for testing and evaluating power FET prototypes. Its simple and efficient design makes testing FETs quick and easy, and its 3- and 4-terminal characteristics enable a wide variety of test conditions to be set. This board can be used to quickly explore and evaluate different FET parameters and characteristics, allowing engineers and designers to speed up the development and testing of their power FET designs.

The specific data is subject to PDF, and the above content is for reference