DG2302DL-T1-E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG2302DL-T1-E3 analog switch/ multiplexer/ demultiplexer IC from Siliconix is a quad-SPDT semiconductor IC. Each switch consists of four single-pole double-throw (SPDT) switches and a control logic. The IC is designed to be used to switch and multiplex / demultiplex analog or digital signals in a wide range of applications.

DG2302DL-T1-E3 is a monolithic integrated circuit which consists of four SPDT (single-pole double-throw) switches. Each switch includes an on/off control logic, which is connected to the signal-ground connection of the switch. When the logic is at "ON" state, the respective switch is active and can connect or disconnect the signal path between two terminals (A and B). When the logic is at "OFF" state, the respective SPDT switch will disconnect the signal and isolate the output from the input.

The DG2302DL-T1-E3 is suitable for a variety of applications where four SPDT signals need to be switched. Its applications include selection of 4-channel multiplex and demultiplex, electronic oscilloscope and spectrum analyzer, line drivers and receivers, multiplex conversion for analog / digital converter, and sensor interface. It can also be used in a variety of applications where multiple switches are needed to connect or disconnect signal paths.

The working principle of DG2302DL-T1-E3 is simple. Each switch can be activated or deactivated by the respective control logic. The on/off logic is connected to the signal-ground connection of the switch and when activated, it will open the switch, connect the signal path between two terminals (A and B) or disconnect the signal and isolate the output from the input. The control logic can be activated or deactivated by inputting high or low control signals on its respective control lines.

The DG2302DL-T1-E3 is suitable for use in applications such as audio/electronic switching, data multiplexing/demultiplexing, and signal routing. It is also suitable for a wide range of high frequency applications such as test equipment, RF receivers and transmitters, fiber optics systems, and other systems requiring high speed signal changes. The DG2302DL-T1-E3 is an ideal device for applications requiring high switching speed, high on-resistance, and high switching current.

In conclusion, the DG2302DL-T1-E3 is a reliable, high-speed SPDT (single-pole double-throw) analog switch/multiplexer/demultiplexer IC designed for a variety of switching and signal routing applications. It is easy to use and is capable of switching between four signals with a single control logic, making it an ideal device for applications requiring fast switching speeds, high on-resistance, and high switching current.

The specific data is subject to PDF, and the above content is for reference