DG2517DN-T1-E4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog switches, multiplexers, and demultiplexers are a type of semiconductor devices used to perform multiplexing and analog signal switching. Although there are many types of devices, the DG2517DN-T1-E4 is one of the most popular devices among them.
The DG2517DN-T1-E4 is a dual 4-bit (4-to-1) multiplexer/demultiplexer device. For introduction, it has 8 pins, each pin is labeled D1, D2, D3 and D4 on one side for data input and the other side for data output. The output pins have a common terminal labeled as C. The C terminal is connected to a control line or ground depending on the application
The most common application of the DG2517DN-T1-E4 is as a selector device in a multiplexing example. Multiplexing is a process of sending multiple signals over the same line. It works by selecting one of the four data inputs and sending it to the data output. This is achieved by the DG2517DN-T1-E4 by applying a logic 1 or 0 to the C terminal. A logic 1 will send the data from D1 to the data output D4, a logic 0 will send the data from D4 to the data output D4. This same device can be used as a demultiplexer, which has the opposite effect of multiplexing by sending one signal from one channel to multiple channels.
The working principle of the DG2517DN-T1-E4 can be explained using a transistor switching circuit. There are two transistors (or other switching elements) connected to the C line. When the C line is at a logic 1 the first transistor is on and the second is off, which means that the first transistor connects the data input D1 to the data output D4. When the C line is at a logic 0, the reverse is true, so the second transistor connects the data input D4 to the data output D4.
The DG2517DN-T1-E4 can be used in a multitude of applications, such as logic interfacing, data acquisition, motor control, power supplies, and communication networks. It is an excellent device for switching between the input and output of analog signals and can be used in many applications, such as to select one of four inputs in a multiplexing circuit or to send one signal to several outputs in a demultiplexing circuit.
In conclusion, the DG2517DN-T1-E4 is an 8-pin device used for multiplexing and analog signal switching. It works using a transistor switching circuit and can be used in a variety of applications. This versatile device is the perfect solution for a variety of applications that require efficient signal switching and multiplexing.

The specific data is subject to PDF, and the above content is for reference