DG309AK/883

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DG309AK/883 analog switches can be used for applications requiring multiplexers and demultiplexers. These switches provide a way of separating an analog signal from multiple sources, or combining multiple analog signals into a single line. The DG309AK/883 provides an industry standard interface for a variety of applications, including analog switching for applications such as audio and video switching, multiplexing and demultiplexing of analog signals, as well as control and signal routing. The switches are designed to deliver reliable performance in a variety of applications.

The DG309AK/883 switch is a monolithic CMOS analog switch that can be used as a multiplexer, demultiplexer, or as a general-purpose switching element. It can be used to switch up to 16 analog signals and has a maximum input voltage of 10V. The on-resistance of the switch is typically 5mohm, which means that there is minimal loss of signal when the switch is in the on-state. The switch also has low propagation delays, typically 5ns for independent control of each channel. The switches are also extremely low power, typically consuming only 0.3mA when in the normal operating mode.

In addition to providing an industry standard interface for multiplexers and demultiplexers, the DG309AK/883 also incorporates several other features that can be used to improve system performance. These include latching versions of the switches which make them ideal for use in multiplexers, scan chain applications and memory address decoding. The switches also have a low power mode which is designed to reduce power consumption and make them suitable for use in portable devices. The switches can also be used with various triggering sources such as microprocessors, logic levels and on-board timers.

The DG309AK/883\'s working principle makes it one of the most versatile analog switches available. The switch consists of two metal oxide semiconductor FETs (MOSFETs), each with a gate and a source terminal. The gate is connected to the control electrode and is used to switch the current flowing through the drain pin. The source is connected to the source voltage of the switch and is used to supply power to the switch. The drain is connected to the output and allows current to flow when the switch is activated. When the switch is opened, no current is allowed to flow.

The DG309AK/883 can be used in a variety of applications that require multiplexers and demultiplexers, such as audio and video switching, multiplexing and demultiplexing of analog signals, and control and signal routing. The switches have low power consumption, a low on-resistance, and are available with an array of control options, making them an ideal choice for designers.

The specific data is subject to PDF, and the above content is for reference