DG528AK

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DG528AK is a CMOS IC analog switch, multiplexer, demultiplexer developed mainly for use in analogue s/w applications of electronic equipment. Its wide variety of applications includes display and order control, medical and office automation, automotive and process control, CCD line and frame transfer and video switching. The DG528AK is capable of handling high level analog signals and can be used in systems using linear, tracking and logarithmic response components.

The DG528AK device can be configured as either an analog switch, multiplexer or demultiplexer with connections to both positive and negative terminals. It is designed to control signals ranging up to a maximum full scale input voltage of 0 to 15V. The IC is highly sensitive and can be used to detect very small movement and electrical changes. Additionally it is designed with very low on-resistance, typically 2 ohms.

The analog switch component of DG528AK can be used for signal routing and for converting between different types of circuits. It is designed with a non-inverting operating mode which prevents the occurrence of high frequency ringing due to feedback and decreases noise. The multiplexer component works by taking multiple signals, multiplexing them, and then sending them through a single output. Also, data signals can be multiplexed and audio signals can be switched without added distortion. The demultiplexer component converts the multiplexed signals back into their originals, allowing the user to access multiple functions simultaneously.

The working principle of DG528AK is fairly straightforward. It features two control inputs, or "pins" — CTRL1 pin and CTRL2 pin — and two single output pins, or "sockets". When CTRL1 and CTRL2 pins are both in the same state, either high or low, the corresponding output pin, or "socket" will be in the same state. If the CTRL1 and CTRL2 pins are in different states, then the output of the device is a connection between the corresponding output pin, thus allowing a signal to pass through. When the CTRL1 pin is in a certain state, and CTRL2 is in the opposite state, the device will operate in a non-inverting mode which will significantly reduce distortion in the audio signal and minimize high frequency noise.

The DG528AK is also capable of supporting a range of signal types, including sine/cosine, pulse, and audio inputs. There are three operating modes that can be used to control the analog switch, multiplexer and demultiplexer depending on the signal type and desired output. These modes are power-on reset, logic reset, and manual reset. The power-on reset mode allows the user to turn the device on and off with a single control signal, while the logic reset mode allows the user to control the device with two control signals. Lastly, the manual reset mode allows the user to manually select which output is active.

The DG528AK is a versatile and reliable interface for many different applications. It can be used as an analog switch, multiplexer or demultiplexer and its low operating power makes it an energy efficient solution. Its wide variety of operating modes ensures that it is suitable for use with any signal type, while its low on-resistance provides maximum sensitivity and accuracy. With its small form factor and robust performance, the DG528AK is capable of providing high levels of performance in a range of applications.

The specific data is subject to PDF, and the above content is for reference