Allicdata Part #: | DIB71CB235MA-ND |
Manufacturer Part#: |
DIB71CB235MA |
Price: | $ 0.00 |
Product Category: | Industrial Controls |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | CURR LVL RLY OVER/UNDER 0.1-5MA |
More Detail: | N/A |
DataSheet: | DIB71CB235MA Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | DIB71 |
Part Status: | Active |
Type: | Current Sensing AC/DC |
Trip Status: | Energized High/Low |
Trip Range: | 0.1 ~ 5mA AC/DC |
Delay Time: | 0.1 Sec ~ 30 Sec |
Voltage - Supply: | 115 ~ 230VAC |
Output Type: | Relay |
Circuit: | SPDT (1 Form C) |
Contact Rating @ Voltage: | 5A @ 250VAC |
Mounting Type: | DIN Rail |
Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DIB71CB235MA is a monitor designed to measure current or voltage signals and transmit the measured value to a relay output. It is a versatile device that can measure signal input from 0-75A or 0-600V, depending on the electrical system it is deployed to. With a flexible configuration, this monitor allows users to easily monitor current or voltage signals, protecting systems from overloads, short circuits, and unexpected system anomalies.
The monitor includes several features that allow these current and voltage measurements to be made with accuracy. Its constant current-limiting circuitry provides the ability to limit the output current within a specified range, making it suitable for a variety of application scenarios. Additionally, the device utilizes Zero Cross Current Limiting (ZC Current Limiting) to protect the system from overvoltages and overcurrents.
The monitor also includes alarm protection and system protection. If an alarm condition is detected, the device switches off and disconnects the secondary load from the primary source. Additionally, if a short circuit or open circuit condition is detected, the device also trips open and the alarm conditions can be displayed on the monitor\'s display. This helps ensure that the system does not experience any unexpected anomalies.
The DIB71CB235MA also features a digital setting knob to set the maximum current or voltage and the measurement range. This allows users to easily and accurately adjust the set-up of the monitor for any particular application. Finally, the monitor includes LED indicators, which help to notify users when the output reaches the programmed limit.
The DIB71CB235MA is a reliable, accurate, and versatile monitor designed to measure current or voltage signals and outputs these values to a relay output. This allows the device to respond to various alarm and fault conditions, helping protect against unexpected system anomalies. Additionally, its digital setting feature and LED indicators make it easy to set up and monitor the device, making it an asset to industrial monitoring systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
DIB71CB235A | Carlo Gavazz... | 138.6 $ | 1000 | 115-230V CURR LVL RLY 0.1... |
DIB71CB23500MA | Carlo Gavazz... | 0.0 $ | 1000 | CUR LVL RLY OVER/UNDER 10... |
DIB71CB235MA | Carlo Gavazz... | 0.0 $ | 1000 | CURR LVL RLY OVER/UNDER 0... |
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V