DLP0QSA070HL2D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, sometimes referred to as CM chokes, are primarily used to suppress common mode noise. Common mode noise, which is noise that is carried through two conductors simultaneously, typically results from imbalanced currents in two circuits that share the same ground reference. The purpose of a common mode choke is to prevent these noise currents from travelling along the shared conductor and creating noise in nearby circuits. The DLP0QSA070HL2D is a common mode choke specifically designed for use in high frequency applications such as Ethernet and digital audio.

The DLP0QSA070HL2D is a common mode filter which is constructed using surface mount technology. It is designed to be used in applications requiring electrical isolation between two wires or cables. Specifically, it is designed to filter out all common mode noise. It can operate at frequencies up to 10 MHz and has a high common-mode attenuation level of 17 dB at 8MHz. It is composed of a ferrite core, two sets of windings (inner and outer) wrapped around the core, and a casing which acts as an electromagnetic shield.

The DLP0QSA070HL2D is a two-wire common mode choke which means that it allows signals on only one side of the choke to pass while blocking signals on the other side. The inner windings are connected to the two wires while the outer windings are connected to the casing. This ensures that the two windings are isolated from each other. Common mode noise is then suppressed as the two windings become inductively coupled and the noise currents are cancelled out.

The DLP0QSA070HL2D also features an integrated shield which provides superior common mode noise suppression compared to conventional common mode chokes. The shield, which is composed of multiple layers of electro-magnets, works in conjunction with the windings to further suppress common mode noise. This provides superior noise suppression, even in high frequency applications.

The DLP0QSA070HL2D is an excellent choice for applications requiring superior electrical isolation and noise suppression. It is designed to provide superior EMI/RFI suppression, even in high frequency applications. Its integrated shield and high common-mode attenuation level provide excellent noise suppression to ensure that signals remain clean and interference-free. In addition, its small size and lightweight design allow for easy implementation in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference