DLP0RSN650HP2D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes are used in a wide range of applications, ranging from power line communication to consumer electronics. The most common application for Common Mode Chokes is in the power supply of computers and other electronic devices, where they are used to reduce the amount of common-mode (CM) noise on the system\'s power lines. The DLP0RSN650HP2D is a popular choice for this application.The DLP0RSN650HP2D application field is centered around Common-Mode Filter applications that require both high attenuation and low-inductance. This type of filter is used to attenuate both differential-mode (DM) and common-mode (CM) noise. The filter is designed to reduce high-frequency noise that can interfere with system performance and reduce system efficiency. The DLP0RSN650HP2D Common-Mode Choker is capable of attenuating up to 35dB of noise, while providing an inductance of 0.05mH.The working principle of the DLP0RSN650HP2D filter is based on the idea of creating multiple, independent electrical filtration paths that cancel out common-mode noise. The filter consists of two independent windings – one for CM noise and one for DM noise. The CM winding produces a large but adjustable amount of inductance in response to the incoming noise. This inductance acts as a low-pass filter, preventing most of the noise from passing through. Meanwhile, the DM winding provides a much higher impedance path that passes primarily only the desired signal.The combination of both types of windings creates a filter that is capable of dealing with a wide variety of incoming noise levels. The filter is designed to be modular, so it can be adapted to fit different applications. By adjusting the physical layout of the windings, an engineer can significantly increase or decrease the amount of inductance, allowing for increased control over the system\'s noise level.In conclusion, the DLP0RSN650HP2D application field is centered around common-mode filter applications that require both high attenuation and low-inductance. This type of filter is used to attenuate both differential-mode (DM) and common-mode (CM) noise. The DLP0RSN650HP2D works by creating multiple, independent electrical filtration paths that are designed to reduce high-frequency noise and improve system efficiency. It is capable of dealing with a wide variety of incoming noise levels and is modular, allowing for increased control over the system\'s performance.

The specific data is subject to PDF, and the above content is for reference