DM74LS112AN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DM74LS112AN is classified as a logic-flip flop and is a kind of combinatorial logic device that is used to store binary data. It has two outputs, known as Q (high) and Q (low), that can be used to store a binary bit of information. The device has four distinct inputs, and by combining two of the inputs, the two outputs can be set, cleared, or left unchanged depending on the current state of the inputs.

The DM74LS112AN has two data inputs, which are referred to as D (high) and D (low). It also has two control inputs, which are referred to as CP (clear) and EN (enable). The CP input is used to clear the contents of the flip-flop and reset the Q and Q outputs to low. The EN input is used to enable or disable the device when it is not in use.

The following figure illustrates the working principle of DM74LS112AN:

As can be seen in the figure above, the DM74LS112AN logic-flip flop works in the following manner. When both the CP and EN inputs are low, the flip-flop is enabled, and the D inputs are read. If the CP input is high, the flip-flop is cleared, and the Q and Q outputs are set to low. When EN is low and CP is low, the flip-flop is enabled and the D inputs are read. If the D (high) input is high, the Q output is set to high, and if the D (low) input is high, the Q output is set to low.

DM74LS112AN is widely used in various application fields, such as computers and circuit testing instruments. It is widely used in digital logic circuits as a memory register. It can be used to store data in any binary form, such as a sequence of numbers or a single bit of data. It is also used in control systems where the output must be determined based on a set of conditions. It can also be used in arithmetic circuits, where the sum or difference of two numbers is stored in two output lines.

In conclusion, the DM74LS112AN is a useful logic-flip flop that can be used to store binary data. It has two data inputs, two control inputs, and two outputs. It is widely used in a variety of application fields, such as computers and control systems, and is a useful tool for storing data in a binary form.

The specific data is subject to PDF, and the above content is for reference