DM74LS123M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DM74LS123M is a Monostable/Astable Multivibrator/One-shot/Timer Integrated Circuit (LS-TTL) that was first released by Texas Instruments in the late 1970s. In this packet, we will discuss the application field and working principle of the DM74LS123M.

Application Field

The DM74LS123M is widely used in wide variety of electronic circuits and applications. It is a great choice for applications where an accurate event duration control is required. It can be used for simple timing control, one-shot pulse generation, and pulse-width modulation (PWM). It is also used in applications such as LED blinks/phasing, producing sound/music and timing of relay-driven prototypes.

The DM74LS123M is often used in test equipment, automotive circuits, and microcomputer peripherals. It is capable of providing time-dependent outputs in response to input pulses. It is also well suited for applications that require long microprocessor cycles or hardware interrupts to occur. The DM74LS123M is one of the most popular devices for controlling physics experiments, robotics and automation projects, and digital logic systems.

Working Principle

The DM74LS123M works on the principle of pulse-width modulation. Its input signal is fed into a voltage-controlled oscillator, which is then connected to a timing capacitor. The capacitor then controls the length of time for the output signal\'s pulse width. When the input signal goes low, the capacitor charges, causing the output signal\'s pulse width to increase. When the input signal goes high, the capacitor discharges, causing the output signal\'s pulse width to decrease.

The DM74LS123M works on the principle of monostable and astable multivibrators. A monostable multivibrator is a device that produces a single output pulse in response to a single input pulse. An astable multivibrator is a device that produces a continuous output pulse in response to alternating input pulses. The DM74LS123M is capable of working as both a monostable and astable multivibrator.

The DM74LS123M has two main operating modes. In one mode, the output pulse width is preset using a capacitor and can be adjusted using a potentiometer. In the other mode, the output pulse width is varied in response to the change in the input signal. This mode is commonly used for applications such as sound/music generation and pulse-width modulation.

The DM74LS123M is a very reliable and easy to use device, making it a great choice for timing control applications. Its high-output current and low-power consumption makes it a very cost-effective choice. The device is easily integrated into existing circuits, making it a great choice for various projects and applications.

The specific data is subject to PDF, and the above content is for reference