DRC3P48A4202

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Contactors (Solid State) are electrical switches that use solid state electronic power component technology for switching electric current. DRC3P48A4202 is a type of contactor, and its application field and working principle are explained in this article.

DRC3P48A4202 is a two-pole, three-phase, AC contactor. The contactor is UL CSA recognized and is particularly suited for switch-mode power supplies. It has a comparatively small footprint and uses minimal wiring to reduce installation time and cost. Moreover, it offers features like built-in surge withstand, noise suppression, and a very low coil power consumption.

DRC3P48A4202 contactors are ideal for motor control applications, where they act as an interface between a controller or an automation system and the electric motor. They have the capacity to control AC motors in systems running on up to 480 VAC, and resistive loads up to 35 Amps. The contactors can also be used to control resistive loads such as heaters, lamps, and fans.

The application fields of DRC3P48A4202 contactors might be further extended depending on the specific requirements. As contactors are increasingly used in a wide variety of automation steps, these contactors can be used to control a variety of process steps including loading/unloading, positioning, speed/torque control, etc.

The working principle of DRC3P48A4202 contactors is quite simple. When power is supplied to the contactor, a current travels through it which turns on a magnetic field. This, in turn, causes the contacts inside the contactor to close, thus completing the circuit. When the power is turned off, the magnetic field collapses, causing the contacts to open, thus breaking the circuit.

DRC3P48A4202 contactors are typically built using MOSFETs to reduce power dissipation. They offer high isolation between the current carrying components and the control path, which allows for reliable and safe operation. Contactors are also available with built-in overcurrent protection for both the control path and the circuit.

Contactors (Solid State) such as the DRC3P48A4202 are widely used in a range of applications due to their high performance and reliability. With a wide range of features such as low power consumption, robustness, and high isolation between the control and the power paths, these contactors are a popular choice for industrial applications. They can be used to safely and reliably switch AC motors, resistive loads such as heaters, lamps, and fans, as well as a variety of process steps in industrial automation.

The specific data is subject to PDF, and the above content is for reference