DRC3P48D4202

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DRC3P48D4202 contactor is a type of Solid State contactor designed to handle lower power loads. It has a specific set of applications and working principles which make it unique.

The DRC3P48D4202 contactor is primarily designed to be used in general switching applications such as motor control, machine control, and similar low power loads. The contactor is powered by a DC source of 24 volts and is switchable up to 32 amps. It has a rated contact life of 200,000 operations and can handle inductive loads up to 25%. It has a built-in freewheeling diode that dissipates spike power and makes sure that the contactor is protected from overvoltage and spiking.

The contactor is a latching type and features a triac power control. This means that it employs the use of a triac power control device to turn the contactor on or off. When the contactor is actuated, the triac will turn on the circuit, allowing the contactor to establish a contact and enabling the load to be switched. Once the switch is off, the triac will again turn off the circuit, preventing any further current from passing through the contactor.

The working principle of the DRC3P48D4202 is based on the use of a microcontroller which controls the triac. The microcontroller receives the input signal from the user and then sends a command to the triac, instructing it to either turn the contactor on or off. The microcontroller also monitors the power supply and switches the contactor on or off as needed. This makes the contactor capable of controlling a wide range of high and low power loads.

The DRC3P48D4202 contactor is ideal for applications such as motor control, machine control, and any other similar, low power loads. Its ability to switch loads at voltages up to 32 amps and its low contact life requirement of 200,000 operations make it a great choice for many industrial or commercial applications.

The contactor is also designed to be highly reliable, with built-in features such as a fail-safe protection circuit and a built-in freewheeling diode. The fail-safe protection is designed to shut off the contactor in the event of any unexpected power outages, while the freewheeling diode helps protect the contactor from spiking or overvoltage. This ensures that the contactor is safe and reliable, even in the most demanding of industrial environments.

The DRC3P48D4202 contactor is a robust and reliable device, designed for low power applications such as motor control, machine control, and other similar loads. Its ability to handle higher power loads, its low contact life requirement, and its high reliability make it an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference